Thanks Shawan, what do I need to code to close it from the remote?

 

HKFM => SCH_FBD = aktiv
HKFM => SCH_TOEHKI = aktiv
HKFM => TASTER_FBD = aktiv

Car needs to sleep for about an hour before coding works.

 

What version of software for G01?

I have E-Sys 3.26.1 and E-Sys launcher 1.0.7.26 which I used a few years ago to setup an F11.

Have now replaced the car with a G01 but when I try to connect E-Sys does not offer any Gxx targets. Do I need to update to a different version of E-Sys/E-Sys launcher or do I just need a different psdzdata? Which versions are needed to support my X3?

 

I have E-Sys 3.26.1 and E-Sys launcher 1.0.7.26 which I used a few years ago to setup an F11.

Have now replaced the car with a G01 but when I try to connect E-Sys does not offer any Gxx targets. Do I need to update to a different version of E-Sys/E-Sys launcher or do I just need a different psdzdata? Which versions are needed to support my X3?

S15A psdzdata covers F090/F097/F098/G001/G002/G011/G012/G013/G030/G031/G032/RR11/RR12/RR31

 

hello friends, how to change front fog light from lamp to LED

Sent from my SM-A710F using Tapatalk

 

I only have HKFM2 and none of SCH_FBD, SCH_TOEHKI, TASTER_FBD are avilable

 

What is name of your CAFD?

 

I only have HKFM2 and none of SCH_FBD, SCH_TOEHKI, TASTER_FBD are available

 

CAFAD is 00002098 004 011 013 anf by the way when I'm connecting my car its show to F25 so I'm connecting to the first one, I hope it s correct for my 2017 F86?

 

FDL Code HKFM2 => HKL_REMOTECONTROLLIFTGATEBUTTON_BUTTON_TYPE = wert05

 

Thank you Shawn finally worked. I also want to change the delay in opening the trunk from remote to 3 seconds, is it possible?

 

It's currently Werte 1F4, which is 500 ms (1/2 Sec).

So I would change it to ***8237;BB8***8236;, which is 3000 ms:

HKFM2 = > HKL_REMOTECONTROLLIFTGATEBUTTON_DELAY_OPEN = Werte ***8237;BB8***8236;.

 

Re:What version of software for G01?

Ahh... I guess the coding guide I am using is out of date as it worked with my last car.

Thanks for the help. Will persevere.

 

Couldn't do this. By default long pressing the trunk button on the remote takes about 2-3 seconds to open it. Few months back I changed it to make it open immediately once the trunk button was pressed but I found its not convenient coz the trunk opened lots of times while I was sitting and remote in my pocket. I wanted to revert to the original default status where it takes few seconds to open when you press the remote trunk button. I forgot which one I coded to change it back to original status.

 

Hello! I want to flash my 2014 F10 to the latest firmwares.
I have E-Sys Launcher PRO 2.8.1, E-sys 3.30.0 (this is the newest that works with Launcher 2.8.1) and v.4.21.12_PSdZData_Full.
Is it safe to make a I level update with this setup?
Thanks for help and Merry Christmas!

 

Yes, but Launcher is used for FDL Coding only. Use E-Sys direct for flashing.

 

C012 errors for cafd_00005fa9 files

I have E-Sys 3.28.1 with v.63.3_PSdZData_Lite. I am trying to read config of my G01.

I can read FA and read ECU, but when I try to read config of the CAFDs I get C012 errors for all but one CAFD. Typical error is (VIN obscured):

BDC_BODY2 [40] [NVXXXXX]
readCPS o.k.
CAFD_00005FA9_105_049_016 Fehler:
File for "cafd_00005fa9-105_049_016" not found! [C012]

When I look in C:\Data\psdzdata\swe\cafd I can only see CAFD files that go up to: cafd_00005710.caf.001_000_008

Where can I obtain the higher numbered CAFD files I need? Is there a newer PSdZData file? If so where can I download it?

Thanks in advance for any help with this.

 

I have E-Sys 3.28.1 with v.63.3_PSdZData_Lite. I am trying to read config of my G01.

I can read FA and read ECU, but when I try to read config of the CAFDs I get C012 errors for all but one CAFD. Typical error is (VIN obscured):

BDC_BODY2 [40] [NVXXXXX]
readCPS o.k.
CAFD_00005FA9_105_049_016 Fehler:
File for "cafd_00005fa9-105_049_016" not found! [C012]

When I look in C:\Data\psdzdata\swe\cafd I can only see CAFD files that go up to: cafd_00005710.caf.001_000_008

Where can I obtain the higher numbered CAFD files I need? Is there a newer PSdZData file? If so where can I download it?

Thanks in advance for any help with this.

PM sent.

 

Files for INPA for. F chasis

Hello does anyone have the files for Inpa f series. I have Inpa but no files for my f1 or f01 chassis. I can research the forum on how to update the files but I can't locate the files. I'm new to the forum so I graciously appreciate your support and I will contribute where I can. Thanks

 

Hello does anyone have the files for Inpa f series. I have Inpa but no files for my f1 or f01 chassis. I can research the forum on how to update the files but I can't locate the files. I'm new to the forum so I graciously appreciate your support and I will contribute where I can. Thanks

PM sent.

 

Does anyone have the latest document for ISTA-P Version & I-Level Overview? The link in the first page is dead. Thanks!

 

does anyone have the latest document for ista-p version & i-level overview? The link in the first page is dead. Thanks!

ISTA/P is for E-Series Only. I assume you mean ISTA+:

View attachment ISTA4.20.3x VERSION AND I-LEVEL OVERVIEW.pdf

 

Request for latest link for PSdZData lite

Hi shawnsheridan,

Can i have the latest link for the PSdZData lite pls ?

Thanks !

You need to update your PSdZData. PM sent.

 

Hi shawnsheridan,

Can i have the latest link for the PSdZData lite pls ?

Thanks !

Link is in Post #1..

 

Request for links for latest software version

Hi Shawsheridan,

can I have the links for latest laucherpro version & psdzdatafull ? I assume latest psdzdata lite version link is on the first post ?

Thank in advance

 

Hi Shawsheridan,

can I have the links for latest laucherpro version & psdzdatafull ? I assume latest psdzdata lite version link is on the first post ?

Thank in advance

You can use E-Sys Launcher PRO 2.8.2 for free, at least until April 2020 when it expires:
http://tokenmaster.blogspot.com/2019/05/e-sys-launcher-pro-282.html.

PM sent.

 

I have been trying to get in touch via Token Master for the Launcher Pro 3.x License Key for last few weeks. I haven't received any response from, is he still issuing licenses?
I saw the post above and configured Launcher PRO 2.8.2 and esys 3.30.1 but I was trying to code my G05 for Lane Change Assit but I could not find the values and the names are not visible fully.
Attached is a screenshot of the same.

Please can some one help how to get the latest version of Launcher Pro 3.7

 

I have been trying to get in touch via Token Master for the Launcher Pro 3.x License Key for last few weeks. I haven't received any response from, is he still issuing licenses?
I saw the post above and configured Launcher PRO 2.8.2 and esys 3.30.1 but I was trying to code my G05 for Lane Change Assit but I could not find the values and the names are not visible fully.

Also I cannot read the SVT always getting error "Generate SVT_Ist failed. [C105]

Attached is a screenshot of the same.

Please can some one help how to get the latest version of Launcher Pro 3.7

No one can help with Launcher PRO 3.x. Only TM can provide as it requires an account setup by him. Unfortunately, he comes and goes like the wind.

If you can't wait, get E-SysX instead.

Info@esysx.com
http://esysx.com/

 

I have been trying to get in touch via Token Master for the Launcher Pro 3.x License Key for last few weeks. I haven't received any response from, is he still issuing licenses?
I saw the post above and configured Launcher PRO 2.8.2 and esys 3.30.1 but I was trying to code my G05 for Lane Change Assit but I could not find the values and the names are not visible fully.

Also I cannot read the SVT always getting error "Generate SVT_Ist failed. [C105]

Attached is a screenshot of the same.

Please can some one help how to get the latest version of Launcher Pro 3.7

 

Finally got eSysX license as no response from TokenMaster.
Successfully coded Automatic Lane Change Assist.

I was wondering how do we use the XML cheat sheet with eSysX as with the Laucher Pro we copy them in the install directory. where do we copy them for eSysX?

Thanks
Blackcomb

 

 

Hi Shawn!

I've installed Esys 3.27.1 software and E-Sys Launcher PRO V2.8.2 Build 162. I getting below error every time I try to edit any CAF.

"An error occurred while processing the EST file "C:\ESysData\e-sys est\Code Away.est". See details for more information. [C157]"

I have tried many times and checked the validity of .est file and my computer's date is set to automatic; everything seems fine. I do not know where am I going wrong.

Any help is appreciated.

thanks!

 

Launcher PRO provides .est. You should not be using it with old "Code Away.est". Uninstall Launcher, remove .est stetting in E-Sys Settings, and then install this Launcher PRO version:

you can use E-Sys Launcher PRO 2.8.2 for free, at least until April 2020 when it expires:
http://tokenmaster.blogspot.com/2019/05/e-sys-launcher-pro-282.html

 

Hi Shawnsheridan, are there any new files for inpa f-serie? Thanks in advance.

 

"New" is a relative term. New since when? Last week? Last year?

There has been no Fxx INPA Updates in a long time. If you want the latest diagnosis capabilities for F-Series, you should use ISTA+, not INPA.

 

Hi Shawn

I got a new i3 and need the latest Data/Software for coding, my i3 has I-Level 19-11-530.

Thanks in advance and greetings from Switzerland

 

Hi Shawn

I got a new i3 and need the latest Data/Software for coding, my i3 has I-Level 19-11-530.

Thanks in advance and greetings from Switzerland

 

Hi Shawn

I got a new i3 and need the latest Data/Software for coding, my i3 has I-Level 19-11-530.

Thanks in advance and greetings from Switzerland

PM sent.

 

Hi Shawn,

I'm using
Launcher PRO V2.8.2.162- BFU_XODE Edition
E-Sys version 3.27.1 (build 44813) - 2015-08-13
PSdZData_Lite v4.20.30

to code a 2016 550i (F10).

All worked great until I took the car to the dealership. They replaced my I-Drive selector and did some reprogramming. Now I cannot connect and E-sys shows a no ZGW available message. Also, the connect via VIN option is disabled.

Can you please offer any suggestions or point me to newer files that might help?

Thanks,
Richard

 

Hi Shawn,

I'm using
Launcher PRO V2.8.2.162- BFU_XODE Edition
E-Sys version 3.27.1 (build 44813) - 2015-08-13
PSdZData_Lite v4.20.30

to code a 2016 550i (F10).

All worked great until I took the car to the dealership. They replaced my I-Drive selector and did some reprogramming. Now I cannot connect and E-sys shows a no ZGW available message. Also, the connect via VIN option is disabled.

Can you please offer any suggestions or point me to newer files that might help?

Thanks,
Richard

No. Nothing you wrote would explain a sudden connectivity issue. Dealer Programming may require updated PSdZData to read ECU(s), but has no affect on Vehicle Connection. Connection issue boils down to Cable and Windows Networking / Firewall, and car ZGW

 

Thanks for the fast answer. I will re-check my configurations.

 

Question I know my 2017 X5 is a F15 however when coding I should pick the F25 because of the year is this correct or did I miss read some of the threads?

Thanks
john

 

Yes, F15 always uses F25 Connection Target.