I'll have to look out how to accomplish it that way then....

Thanks for all the responses...

 

hi guys, i came from an F10 M5 and an F83 M4; Now a G12 B7 which has a COMPLETELY different CAFD naming convention... Any good G11/G12 cheat sheets out here?

 

No. Cheat Sheets are no longer made. Instead, most write Launcher Codes.

 

Very please for the latest psdzdata files for e-sys!
Thanks in advance!

 

What is wrong with links in Post # 1?

 

Howdy, I had my cluster replaced in my F22 and lost all my coding data. I'm trying to get back into reset all my settings but my FXX token i bought several years ago is expired (no surprise). It looks like this launcher premium tool replaces a need to buy another token, but it's asking for an activation code. I did shoot the code off to Token to see if he can generate one. Is that the right way to go about this? Wasn't sure if there was something I missed when trying to generate a new EST file. Any help would be awesome!

 

You should not need Activation code in Fremont unless you are using VM or have non English computer settings. Yes, email is the way to go, but new codes are on temporary hold until new Launcher release.

 

Basic coding language

I think Bmw use basic C for their coding language. Is any framework available for it?. in basic electric cars currently we using c for basic controls. for that detailed coding sas training in chennai

 

Hi guys. Following instruction on page 1, at point .09, I run E-Sys Launcher Premium, but it doesn't appear any PIN field, but appears a windows where I should enter the activation code (or I should require it...)

What's wrong?


Thanks

 

Hi guys. Following instruction on page 1, at point .09, I run E-Sys Launcher Premium, but it doesn't appear any PIN field, but appears a windows where I should enter the activation code (or I should require it...)

What's wrong?

Thanks

Certain regions require an activation code. You must contact developer directly via email to acquire.

 

i just get my first BMW 335i modern line, I need to add the Sport+ functions and others to my car, can some one explain how to do it and which connector and software use for this.... and also if some one add paddle shift to this car, my donsent have it.....

 

Asked and answered:

http://www.bimmerfest.com/forums/showpost.php?p=11234281&postcount=13102

 

Need some help here.

I couldn't proceed further trying to generate token with E-Sys Launcher Premium V2.7.1.135. So after entering the PIN + Confirm and I hit 'Generate Token' at the EST Software Token page , the message

"EST Software Token Successfully. Press OK to continue" appears and after clicking OK, it then would return to the EST Software Token page. This keeps going on an would not proceed anywhere further. Please advise.

Also, FreeToken.est did not get created after the above attempt and it does not launch E-Sys software either

 

Does anyone have a solution for this, im having the same issue.

 

My 2008 BMW X5 went into limp mode and can't figure out what is wrong with it. When you put the key in it just dings and the windshield wipers come on. Can any one help me. I took it to a shop and they charged me $1,400. It worked for about a hour and went back into limp mode***129335;***127997;***8205;***9794;***65039;[emoji780]

 

Searching for help with E-Series (E70) on Thread for Fxx-/Ixx-/Gxx-series won't likely get you much...

And for the $1400 already paid, that shop needs to be the one helping you.

 

Hello,

thanks to your help, I was able to do some coding in november 2016 on my M235I (F22). It allowed me to disable the "fake" engine sound from the ASD Module

I suspect my BMW shop did override my setting as the car is there right now so I'm wondering... Do I need to update some software / data before trying to disable the ASD again?

Thanks a lot!

 

Hello,

thanks to your help, I was able to do some coding in november 2016 on my M235I (F22). It allowed me to disable the "fake" engine sound from the ASD Module

I suspect my BMW shop did override my setting as the car is there right now so I'm wondering... Do I need to update some software / data before trying to disable the ASD again?

Thanks a lot!

 

Hello,

thanks to your help, I was able to do some coding in november 2016 on my M235I (F22). It allowed me to disable the "fake" engine sound from the ASD Module

I suspect my BMW shop did override my setting as the car is there right now so I'm wondering... Do I need to update some software / data before trying to disable the ASD again?

Thanks a lot!

Latest software is always found in OP. Not ever dealership visit results in programming, but updated firmware usually requires new set of PSdZ. You will know if you get any read errors.

 

Thanks a lot @Almaretto!

I've let them the car to investigate an issue with a speaker... And told me they did some software update. So I'm wondering if they've seen a fault with the ASD and maybe flashed it back to "default".

I'll know when I get the car back!

 

Thanks a lot @Almaretto!

I've let them the car to investigate an issue with a speaker... And told me they did some software update. So I'm wondering if they've seen a fault with the ASD and maybe flashed it back to "default".

I'll know when I get the car back!

They will not individually code settings, but part of flashing is VO coding back to factory values.

 

How long does it generally take to get the activation code when originally installing?

Thanks

 

It varies widely based on TokenMaster's schedule.

 

Got it...I also see 2.9.11+ is out on his site (PRO 2.9.11 Build 306 as of 10/8)...the files in the OP (Mega) are still on 2.7.1.135

Assuming you'd want to update Launcher to the latest version right?

It is two different versions, the latest of which are:

ESysLauncherPremiumSetup_2.7.1_Build_135.msi
ESysLauncherPROSetup_2.9.11_Build_306

PRO can only be obtained from TokenMaster himself.

 

It is two different versions, the latest of which are:

ESysLauncherPremiumSetup_2.7.1_Build_135.msi
ESysLauncherPROSetup_2.9.11_Build_306

PRO can only be obtained from TokenMaster himself.

Looking to code a 2017 X3 but cannot see the gateway. Are there updated coding files available?

 

hello, I can write new VIN with PSdZData Lite or I need complete PSdZData ?

 

Hello, I know that I may not ask in the right place, but maybe someone can help me.

I retrofited an ATM on my car, and everything was working OK until I wanted to upgrade firmware inside it. I used 62.2 database and because Esys couldn't find corect hardware I used HW-IDs from SVT actual, update worked OK, but after finished NO MORE DATA connection.

GPS is still working but DATA connection not. In ISTA D , ATM says it is connected to network and roaming, but .... nothing.

Now, ATM came with: BTLD_000026A2_001_031_002
FLSFL_000026A3_001_031_002
HWEL_00002AD7_113_001_001
SWFL_000026A4_001_031_002
SWFL_000026A5_001_031_002
SWFL_000026A6_001_031_002
SWFL_000026A7_001_031_002

As I can't make Esys to find correct HWEL with all FA that I tried using 62.2 database, I'm thinking to find and older database. So maybe someone has older databases and can search for files that I wrote earlyer and can tell me what database to use, at least to revert back the upgrade.

ATM came from an G12 20.10.2015.

Thank you and advance.

 

Hi all!!

I will really appreciate ur help.

I was trying to code BDC BODY options in my f56 but I am getting and error.

BDC_BODY
readCPS o.k.
CAFD_000017BE_062_010_112 Fehler:
File for "cafd_000017be_062_010_112" not found (C012)


I have downloaded latest PSdZData files, but seems is not available.

Could someone plz share this CAFD file???

Best!

 

It is in latest 62.5, so either you have the CAFD or you don't have the latest PSdZData.

If you don't have it, download and copy to C:\Data\psdzdata\swe\cafd:

cafd_000017be.caf.062_010_112:
https://mega.nz/#!x0gzzSoJ!1K6ysk9Pl_aUmKQ21wyeQUmSBHjqOIdvn77W9nViEeA

 

thankss

 

Hey!!!

Thanks a lot for ur quick response!

Let me try, I will give my comments.

Best!

 

I'm trying to do a new install using the newest software. I removed all old versions.

When attempting to generate the token, E-Sys Launcher Premium is giving me an error: "Invalid provider type specified."

Any ideas?

 

I'm trying to do a new install using the newest software. I removed all old versions.

When attempting to generate the token, E-Sys Launcher Premium is giving me an error: "Invalid provider type specified."

Any ideas?

Sorry, no idea.

 

Hello coders,

My laptop is loaded with:
ISTA+,
ISTA-P
NCS-expert
ToolSet32
Inpa
And other programs coming in the package on Mega.

I am trying to do some coding on my 2009 X5 E70.

My cable is k-dcan.

How can I code:
“automatically lock doors after x minutes “
“Automatically roll up windows after x minutes “
“Automatically fold mirrors after x minutes”

I’m sure it is a pretty basic coding task. I’m new to coding (have successfully coded an agm battery before, so I’m familiar, just need some tips)

Thanks so much



Sent from my iPhone using Tapatalk

 

Hello coders,

My laptop is loaded with:

I'm sure it is a pretty basic coding task. I'm new to coding (have successfully coded an agm battery before, so I'm familiar, just need some tips)

This thread is for Fxx/Ixx/Gxx-series BMW's, which uses different cables and software than E-series.

You just need NCSExpert and K+DCAN, but I will not be much help since I never coded E-series

 

Another question,

Is it possible to update the CCC display software/firmware?


I have seen different displays and different menus on e70s. Mine doesn’t have them.

Not sure if the display with a curvy or arc shape menu is newer.

So can/how I update that?


Can I basically do any software updating on the car?


Sent from my iPhone using Tapatalk

 

Installed Launcher Premium 2.7.1 Build 135 in a new Win 10 laptop and install never asks to create token. E-Sys installed successfully but no token anywhere. Uninstalled Launcher, reinstalled and the same thing. Any idea of why this is?

 

You use launcher to start esys?

Sent from my iPhone using Tapatalk

 

Can I have the links to full psdzdata please ? Many thanks

 

http://www.bimmerfest.com/forums/showthread.php?t=901081&page=58

 

Can I have the links to full psdzdata please ? Thank you

Sent from my BLA-L29 using Tapatalk

 

Look one post above yours.

 

Does anyone know if Launcher 3.0 available to download yet? I see on TolkenMasters website details of the release, but I do not see mention of how to download it on the website or these forums.

Cheers and happy new year!

 

Does anyone know if Launcher 3.0 available to download yet? I see on TolkenMasters website details of the release, but I do not see mention of how to download it on the website or these forums.

Cheers and happy new year!

Since December 23 and already an update. There is only a Pro version and must be acquired directly from developer.