RE: E-Sys Launcher Premium

Last week I installed E-Sys v3.27.1, Psdzdata 3.63.3, and the current version of the Launcher. Everything worked fine up to and including connection to the vehicle so I put it away, planning to resume experimentation yesterday, whereupon I discovered that the launcher didn't work any more. Does anyone know if TokenMaster will be making the Pro version 3.0 available for download?

 

Last week I installed E-Sys v3.27.1, Psdzdata 3.63.3, and the current version of the Launcher. Everything worked fine up to and including connection to the vehicle so I put it away, planning to resume experimentation yesterday, whereupon I discovered that the launcher didn't work any more. Does anyone know if TokenMaster will be making the Pro version 3.0 available for download?

It is available. You just must get online login to create activation code to use. See instructions in OP.

 

Thank you for that information, Almaretto and shawnsheridan. Upon running into the issue with Premium yesterday I sent an e-mail to fxxtokenmaster@gmail.com so I'll wait to hear from him.

 

Guess I should have flashed my car before 12/31 haha

 

You do not need Launcher to flash, but you would afterwards to re-code.

 

I just contact Launcher Pro Developer, and he replied "NOTE: If you are inquiring about Launcher Premium, it is no longer supported and I no longer issue activation codes."
Where can I get Launcher Premium 3.x?

 

There is no Premium 3.x. There is only Pro 3.x. You got automated response and just need to wait for real response.

 

Hello,
a friend in Germany asked me to change some codings with his new car (M235i, F22). I'm good known with coding tools for VAG-AG, Ford & other CAN-Tools for automotive development so I think this should be no problem for me. Could you tell me which software should I use? It's really difficult to understand the big amount of different software for BMW coding, for the others it's always "one perfect software".

I got BMW E-Net cable allready and have 2 month time to code the car until it will drive again, so I want to start reading manuals and software guidelines now. The biggest part to code is to deactivate all known airbags, except the airbag in the wheel and the co-driver front airbag. He got a cage for the car and is doing a full-racing rebuild, the car will not be driven on official roads in Germany but who wants to drive with error on a racing track? So he asked me to disable all airbags, if possible he will hold the wheel-airbag and the co-driver front airbag (it's accepted by the cage building). It this is not possible please tell, then I will deactive it to and will get it out of the car. (All other airbags are already out of the car & yes, I am allowed to do this )

Best regards
JumpY2k3

 

Hello,
a friend in Germany asked me to change some codings with his new car (M235i, F22). I'm good known with coding tools for VAG-AG, Ford & other CAN-Tools for automotive development so I think this should be no problem for me. Could you tell me which software should I use? It's really difficult to understand the big amount of different software for BMW coding, for the others it's always "one perfect software".

I got BMW E-Net cable allready and have 2 month time to code the car until it will drive again, so I want to start reading manuals and software guidelines now. The biggest part to code is to deactivate all known airbags, except the airbag in the wheel and the co-driver front airbag. He got a cage for the car and is doing a full-racing rebuild, the car will not be driven on official roads in Germany but who wants to drive with error on a racing track? So he asked me to disable all airbags, if possible he will hold the wheel-airbag and the co-driver front airbag (it's accepted by the cage building). It this is not possible please tell, then I will deactive it to and will get it out of the car. (All other airbags are already out of the car & yes, I am allowed to do this )

Best regards
JumpY2k3

In OP, there is link to Complete Software & Interface Overview and Coding: Getting Started Guides, Tips, & Cheat Sheets.

 

1. I heard that is not possible to code the most recent cars that have NBT_EVO. Does that information proceed?

2. I have 2 PC's. Can I install new Launcher Pro on my two computers or do I have to pay U$ 50,00 for every PC I would like to have it?

 

1. No. I code G-series and other NBT2 vehicles all the time.
2. You get two activation codes so you can install on both if you desire.

 

Where to get the new launcher

Hi, my Launcher is outdatet and asks for make a token again and again. Is there a new launcher out? Where can I get it for privat people?
Thanks a lot.

 

Hi, my Launcher is outdatet and asks for make a token again and again. Is there a new launcher out? Where can I get it for privat people?
Thanks a lot.

Know issue. Read PDF Instructions in OP.

 

I am a recently licensed user of version 2.9.15.333 Pro. How do I obtain the upgrade to version 3.0?

 

Contact developer. You need website access to generate activation code.

 

Hi all.
In the last 4 days TM responded to someone on the email?

 

Hundreds of emails.

 

He answered hundreds of letters?
If so, then I do not know what to do.
I paid 4 days ago and received no answer.
At least wrote that "Everything is OK, wait."

 

Yes. He receives and responds to hundreds. Sometimes, it may take up to a week to respond. He responds in order received, so if you write again it may take longer. But, if you do not hear after a week, I would write another message.

 

Hey, can i get please the links to ista p?

 

No. Wrong thread.

 

Upgrading E-sys to 3.31 on Mac

Hi can I get Link to V3 please and installation instructions for E-Sys 3.31

thanks

 

Hi can I get Link to V3 please and installation instructions for E-Sys 3.31

thanks

V3 must be acquired directly from developer. Instructions in OP PDF (Section 2).

 

Almaretto,

hwo can get the Launcher Pro 3.x ,thanks!

 

You copied whole thread, but did you have a chance to actually read it? This is "NO REQUEST" thread. If you need Launcher Pro, instructions are in section 2 PDF.

 

Launcher Premium is back. V2.8.0 is out now

 

I***8216;m searching and searching but cannot find any link.
Is someone here having one for Version 2.8 ?

 

Maybe we’ll start getting some emails from TM soon then. For people who are waiting for Download of Pro. As he’s obviously been busy working on getting premium out as well

 

Oh,just read his blog, I guess that means I get premium for free or just wait longer for the money I’ve donated for pro. From a cynical perspective I can’t see why he couldn’t see this was going to happen. I.e end a token and want to verify everyone’s contribution all whilst trying to fix bugs ?

 

Link is up

 

I don't know if @Tokenmaster sees these posts but I'd like to say thank you for releasing a revised version of Esys Launcher Premium. You have made a personal sacrifice for the benefit of the enthusiasts on this and other forums.

It is a pity though that a contingent out there took the great work you have done for the community and abused it.

Without you're dedication I wouldn't have been able to continue coding and updating my own car with Esys nor helping the few people in the UK who have reached out to me via the forums to assist with the coding of their cars.

 

just tried installed 2.8, and it keep asking me to install network framework 3.5 and restart, i do that and it keeps coming back, i have network frame 4.7.1 installed as i checked.

 

Hello. I'm using psdzdata 63.3.

I downloaded the 63.3+ CAFD package.

And I still get the cafd_0000067b.caf.002_015_001 error with the ICM

Can you help me?

 

If you are using 63.3 from ISTA+, it has cafd_00001412.caf.002_015_001. Do you have error VO Coding ICM using original unmodified FA?

 

Guys, i have reinstalled my old laptop. Windows 10.
I am trying to reinstall esys and esys launcher. The new 2.8 wont install because it is 2gb ram.

So i installed older launcher 2.0 but after generating token i get the launch screen but the i keep getting generate token screen again.
Any idea’s?

Is it a problem to use older premium launcher with newest psdz data and 2017 Mini Countryman?

Thanx


Verzonden vanaf mijn iPhone met Tapatalk

 

Guys, i have reinstalled my old laptop. Windows 10.
I am trying to reinstall esys and esys launcher. The new 2.8 wont install because it is 2gb ram.

So i installed older launcher 2.0 but after generating token i get the launch screen but the i keep getting generate token screen again.
Any idea's?

Is it a problem to use older premium launcher with newest psdz data and 2017 Mini Countryman?

Thanx

Verzonden vanaf mijn iPhone met Tapatalk

How are you running Windows 10 with 2GB?

All Premium 2.7X and below launchers expired on 12/31/17

I tried to install the E-sys 2.8 but I have a problem, do you know what it can be?

I put photo:

Looks just like picture states. You need to install E-sys otherwise Launcher has nothing to open.

 

How are you running Windows 10 with 2GB?

All Premium 2.7X and below launchers expired on 12/31/17

Looks just like picture states. You need to install E-sys otherwise Launcher has nothing to open.

Ok, solved, thank you very much.:thumbup:

 

I tried to install the E-sys 2.8 but I have a problem, do you know what it can be?

I put photo:

 

Sorry i meant windows 8***129325;

A older launcher explains a lot.
So no way to install it with 2gb after all right?

Verzonden vanaf mijn iPhone met Tapatalk

 

Sorry i meant windows 8***129325;

A older launcher explains a lot.
So no way to install it with 2gb after all right?

Verzonden vanaf mijn iPhone met Tapatalk

You actually get an error that says 2GB not enough?

 

Installed Launcher Premium 2.8, and its asking for activation code. Is this normal? I'm in the US with locale set to english.

NVM, had russian installed as a second input language. Remove and viola.

 

Do you know if with this version Launcher Premium 2.8.0 you can do FA?

 

launcher only needed for FDL Coding.