Thanks I get it now.. So that means I will need the full PSDZDATA files. Also will i be able to flash the rdc module with engine running, I know i can code with engine running except for DME but not sure about engine running for flashing or for CAFD injecting which I know doesnt apply to RDC module but for future reference. Thanks again for your help.

 

Engine cannot be running. Flash TAL puts car in Transport Mode, which kills motor if running, stalls car, and Flash fails.

 

Hi!

I already sent five e-mails to the "fxxtokenmaster@gmail.com", all without answer.

What I need to do?

Regards,

Sato.

 

Hi!

I already sent five e-mails to the "fxxtokenmaster@gmail.com", all without answer.

What I need to do?

Regards,

Sato.

 

Hi!

I already sent five e-mails to the "fxxtokenmaster@gmail.com", all without answer.

What I need to do?

Regards,

Sato.

Download ESYS Launcher Premium which was made freely available by Tokenmaster and use that instead? Download links are available on this forum.

 

Hi I need a new activation code to use on a VM under my macbook pro. Untill last year everything works fine on my old F33. Now I bought an used F11 and e-sys tell me the code is expired
I've already tried to download e-sys 3.27.1 and e-sys launcher premium 2.8 but this one tell me error during start

 

I am using: Launcher Pro 3.1.0 with Esys 3.32 and PSdZData V4.10.30 Lite with a G30 CAFD files I downloaded from the car and saved in the default CAF directory.

I can edit most files OK but some important files like the HKFM2 and others do not show properly. Can someone help?

 

I am using: Launcher Pro 3.1.0 with Esys 3.32 and PSdZData V4.10.30 Lite with a G30 CAFD files I downloaded from the car and saved in the default CAF directory.

I can edit most files OK but some important files like the HKFM2 and others do not show properly. Can someone help?

 

Help please

 

Remove kiswb that you are not using.
Install 64-bit java and copy contents over to E-sys directory in folder jre_x64
Increase memory to 4-8GB

For HKFM2, edit my Cheat codes. Change ID to 570E and they will work.

 

Activation Code

Due to laptop failure I have to reinstall Esys,
I installed Esys 3.27.1,
Latest PSdZData lite,
Launcher Premium v2.8.0.143.
all from opening post, however on start up of launcher premium I am being asked for an "Activation Code" is there any solution for this as I don,t have such a code ?

John

 

Solution was uninstall then reinstall and all ok.

 

I try to code my car which was reprogrammed last week,

Could someone please advise me? I am using:

• Windows on VMware, Windows, Region and Language setting English (United Kingdom)
• E-Sys 3.27.1 (E-Sys is working perfectly)
• Launcher Premium 2.8.0_143

When running Launcher Premium I still receive the activation code message, it used to work in the past.

 

VM = Activation Request

 

This is what I get in VMware Fusion. I have a Mac and don't have a Windows laptop. E-mailed the guy 2 weeks ago, no answer. So I am stuck and can't code from my MacBook? Installing Windows on it is not an option.

 

This is what I get in VMware Fusion. I have a Mac and don't have a Windows laptop. E-mailed the guy 2 weeks ago, no answer. So I am stuck and can't code from my MacBook? Installing Windows on it is not an option.

View attachment 789106

Correct, you can't code from Mac without the Activation Code.

 

hi, anyone know why my launcher premium 2.8 asking for activation code when i installed on Windows 10 laptop, not in VM?

i had emailed token master as well, with donation receipt. yet to get reply.

my windows 10 build number is 1803 17133.1

 

hi, anyone know why my launcher premium 2.8 asking for activation code when i installed on Windows 10 laptop, not in VM?

i had emailed token master as well, with donation receipt. yet to get reply.

my windows 10 build number is 1803 17133.1

Individuals in Asian, Italian, and Russian countries often require activation code.

 

How do I know which psdzdata version is this? v4.10.30_lite?

 

Version is in file name, same as always. It's version 4.10.30.

 

What has happend to version numbers on psdzdata lite? Last time I downloaded it, it was v.62.5, but now it's v4.10.30. How is this newer version? Can somebody please explain to me? because I am confused now.

I had my F10 at service and the dealer has updated the car's software, so I guess I need the latest psdzdata version.

 

I have here the last version released before that which was v. 63.5.

In this kind of version I wanted to know.

My question is the same as the friend above

You have latest version (well technically now v.4.10.42 is as it was just released). Older versions were pulled from ISTA/P (e.g. 63.x) whereas new versions are pulled from ISTA+ as ISTA/P no longer supports F/I/G Series.

 

BDC_BODY [40] [V507353]
readCPS o.k.
CAFD_000017BE_071_010_130 Fehler:
File for "cafd_000017be-071_010_130" not found! [C012]
Can anyone help out with this? I seem not to have the latest file. I have downloaded the lite version above. Version 4.10.30.

 

cafd_000017be.caf.071_010_130:
https://mega.nz/#!14xzVCZS!yh1Uij04sDObL39heYQ0SiF0_nC6Hp2eMJPSMSyX5RI

 

Hey Shawn,

Would you mind sending me the link to the latest E-Sys, psdzdata and token gen please?
Greetings from Germany

 

What is wrong with Links is Post #1?

http://www.bimmerfest.com/forums/showpost.php?p=10193333&postcount=1

 

Hey Shawn,

Would you mind sending me the link to the latest E-Sys, psdzdata and token gen please?
Greetings from Brazil

 

Really? :tsk:

What did I just write in the Post above your Post?

THE LINKS ARE IN POST #1.

 

Hey Shawn,

Would you mind sending me the link to the latest E-Sys, psdzdata and token gen please?
Greetings from Brazil

 

Hi,

I have just had my cars ecu's re-flashed by BMW. So I went to re-apply my coding options.
However, when I code the options, they show success, but they don't seem to actually apply and when I read out the FA again, the options are back to default.
Any idea why?

Using:
Windows 7
E-Sys 3.28.1
Launcher v2.7.1_Build_135
PSDZDATA LITE FROM DATA_SWI 4.10.41 04-2018

 

Then use Code FDL to apply Coding Changes, not Code.

 

Thank you, will try that tomorrow..

 

anyone kno where I can fun the pdc module in f10 550, I have no warning available from it and I can see it on esys but don't physically kno where it is. Any help?

Sent from my SM-N950U using Bimmerfest mobile app

 

build in JBBF

 

do you know where can I find that junction box in the car?

Sent from my SM-N950U using Bimmerfest mobile app

 

I've been looking everywhere for the Esys Launcher.. i tokens site says hes overwhelmed and released version 2.8 which supposed to insert a token automatically.. and supposedly the link on 1st page has been updated.
i downloaded it and no go.. wont open.. i double click it then nothing happens. Not much in the forums out there troubleshooting wise.
Any one can help ? i have tried other versions, they open just fine but those require tokens and token popup wont let me through.
Thanks!

 

I keep post #1 updated. It has latest working premium launcher and psdzdata. Third part security suites as well as Windows UAC can prevent from launching.

 

what esys version will work on an e90 for coding? I have the lasted Launcher and esys and have been using them fine on my vehicle, but I have a friend with an 09 e90 and when I load the version launcher I have it doesn't show any e cars. Any help would be appreciated.

Sent from my SM-N950U using Bimmerfest mobile app

 

None. It is for F / I / G Series Coding and Programming only.

E-Series uses NCS Expert for coding, and a DCAN Cable (USB) instead of an ENET (LAN) Cable.

 

Hi all im new to all this. i got my first bmw f30 4 weeks ago and im in love

iv downloaded all the parts needed but can i confirm i need to pay for the token???

Thanks