Bimmerfest BMW banner

1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
I need to re-attach my 1997 Z3 top to a support bow. There is fabric that runs the length of the bow and its held in place by a c-channel. The fabric on the bow and the top have separated causing the top to balloon up while I drive. No tears in either the bow fabric or the top; the glue must have simply given up the ghost. I'm looking to find out the best adhesive to use in re-attaching the top to the bow fabric. Sure would appreciate recommendations from someone who has had luck in doing this before.
 

·
Registered
Joined
·
208 Posts
There are several options, I used HH-66 contact cement, but 3M Hi-Strength 90 spray adhesive is recommended by some installers. 3m double sided VHB tape is another option, good for trim items too.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #3
Thanks. I just ordered HH-66 from e-bay. I read several blogs and articles about the product but hadn't seen where anyone actually used it for my intended purpose. Hope to have issue resolved by this weekend. Thanks again, Steve
 
1 - 3 of 3 Posts
Top