BimmerFest BMW Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi there,
my car is F30 320i 2013. Currently my steering wheel is so hard to turn especially at low speed, for example during parking.

Curly returned the following error codes:

Sensor - rotor position - Steering Angle - loss multiturn value Code: 482394
Power supply - Local undervoltage reduce steering assistance Code: 4823FC
Power supply - Local undervoltage shutdown steering assistance Code: 4823FD
Power - Global Undervoltage Detects Local Code: 4823D4


any ideas what the problem would be or how can i diagnose this?
 

·
Registered
Joined
·
349 Posts
Use real diagnostics like BMW Rheingold. Carly is ok to read the codes on the side of the road to figure out if it is safe to limp home, but it is not a substitude to real diagnostic software.
 

·
Registered
Joined
·
13 Posts
Use real diagnostics like BMW Rheingold. Carly is ok to read the codes on the side of the road to figure out if it is safe to limp home, but it is not a substitude to real diagnostic software.
Ok, so how much is Rheingold for non commercial use? Best place to get/buy?

BMW 328i E93 CV
 
1 - 3 of 3 Posts
Top