BimmerFest BMW Forum banner
1 - 3 of 3 Posts

·
///M 'n it up!
Joined
·
1,738 Posts
Discussion Starter · #1 ·
Does anyone know how to disasemble the vynl and plastic around the roll bars in a 2001 Z3 Roadster? I'm having the hardest time determining how to remove the vynl top pieces that surround the roll bar. The end goal is to remove the "back wall" part that sits between the rollbars.

If anyone has instructions on how to disassemble the plastic and vynl parts that make the wall that surrounds the roll bar, I'd be greatly appreciative.
 

·
///M 'n it up!
Joined
·
1,738 Posts
Discussion Starter · #3 ·
So in summary of that article, the answer appears to be that the roll hoops need to be removed first. Then remove the plastic top pieces and then the surrounding wall should come up pretty easily.

My goal is to change out the "sub" wires for a new 8" that's going in a custom box.

I'll try this and get back with you.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top