BimmerFest BMW Forum banner

DSC light ON , water on RED

843 Views 2 Replies 2 Participants Last post by  englezu
i buy recently an e46 2004 and i have a very strange problem, when the engine is hot, and the water is at 1/2 ( normal position) if i turn the engine off , and i try to on the DSC is remaing on screen , the water is go to 180degree on red and he don`t let me turn on , i have in left panel the DDE light on , where is the problem? i don`t know what to do... today i stay 20min`s on gas station because i must wait engine cooled to turn on , if i stay 10-20 mins and the engine is cooled the car works , i put on a tester.. but no error

one guy tell`s me to change de ecu unit with ews and keys... i hope is not the problem

on walking the car not make problems any kind
See less See more
1 - 1 of 3 Posts
Did anyone work on the cooling system lately ? New thermostat or anything like that ?
Sounds like you might need to bleed the cooling system. There are instructions in the E46 Wiki (see link at the top of every page), also several videos on YouTube.
Good luck !
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.