Bimmerfest BMW banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1 (Edited)
Hi Guys,

I'm not sure how to troubleshoot this. I haven't heard back from Tokenmaster to buy the Pro edition so i'm stuck trying to get the Premium launcher working on an old Win7 machine.

I followed the installation instructions here. This is on E-sys 3.27.1 with the backdate launcher hack. I've also tried updated the Data files in the VM and still no luck. file:///C:/Users/regan/OneDrive/Documents/_Personal/Cars/BMW%20i3/Beginners%20Guide%20Coding.pdf

Any idea why the SAS modules in FDL are showing with just a "." under funktionen instead of the full name in german? I'm assuming this might be a permissions issue but the top of the E-Sys navbar shows Powered by Tokenmaster launcher premium V2.6.2.124.

This is on a 2015 i3 with PSdZData files from 12/2018. Trying to FDL code the SAS module. VO coding was successful. FDL coding thru Bimmercode also successful but E-Sys no luck yet.

Any help or guidance would be amazing.
 

·
Super Moderator
Joined
·
7,064 Posts
Data is not corrupt. All PSdZData after 3.54.1 is trimmed.

If you are seeing trimmed CAF, then:
  • Selected wrong launcher target
  • Not enough system memory
  • Not mapped in installed Launcher
 
1 - 2 of 2 Posts
Top