BimmerFest BMW Forum banner

1 - 4 of 4 Posts

·
Matching beemer & bimmer
Joined
·
655 Posts
Discussion Starter #1
For the first time since I bought my bimmer I had three passengers in the rear. They asked "Where's the center seat belt latch?"

It was missing somehow; so I removed the rear seat bench to find it (and a 2002 dime).

At first, I didn't know what the procedure was, and I was a long way from my Bentley manuals, but, a minute of trial and error had the seat off.

So that the next person benefits, apparently all you need to do is lift up on each side and then pull toward the front. There is apparently a cylindrical "fist" which fits in a cylindrical "canyon" molded into the foam on the bottom of the leather-covered rear seat bench.

Essentially, ya' just pop it up and pop it back in when you're done.
 

Attachments

·
Premium Member
Joined
·
5,938 Posts
Yep, just grab it approximately in the middle of one seat and yank up hard and do the same on the other side. Then you kind of slide/jimmy it out.

Putting back it, you need to kinda line up the seat belts to go through the holes but not a big deal.
 

·
Premium Member
Joined
·
5,938 Posts
Sure...why not? :dunno:
 
1 - 4 of 4 Posts
Top