BimmerFest BMW Forum banner
1 - 1 of 1 Posts

·
Cogito Ergo Zoom
Joined
·
3,626 Posts
If you have the aluminum stiffener plate under your engine, put the jack under the raised rectangular spot near the back of it. If your car is too low to get the jack in there you'll need to use the scissor jack in the trunk to lift one of the front jacking points to gain enough height. No need to remove plastic plate before lifting, it's not in the way.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top