Brilliant Shawn, you're a rockstar !

 

Hi Shawn,
please, can you send me link to latest E-sys and PSdZ data?
Thank you so much

 

PM sent.

 

Hi! I have a problem... i'm trying to activate internet and app at my retrofit nbt. I have followed a f30bimmerpost forum where says you have to write a fake vin to activete it.
I wrote it but I couldn't activate and now when I try to rewrite the nbt original vin I take an error (down pic).

I try to change a different vin and there is no problem is only with the nbt original vin. and I have used psdzdata 54 and 56 versions and allways give the same error
The biggest problem is the navegation and usb are inactive

How can I write the original vin (WBA3K11040F25819)? :eeps:

 

With only coding, I've managed to activate BMW Live Services on my 2012 F20 1.18i equipped with HU_ENTRY. I have successfully shared my iPhone's internet connection with the car using Personal Hotspot. But while roaming in the Street View, I can't go forward or backwards because my control jog doesn't have up and down buttons

Also, I've activated sport gauges on the iDrive which shows Power&Torque but it doesn't show any movement. I think this is because my N13 engine doesn't have related data stream structure for power and torque. If someone knows how to get it to work, please tell.

Finally I've changed my FA's Zeitkriterium (from 0312 to 0713) in order to have the newer version of KOMBI (instrument cluster) graphics and enable newer SVT tree, but two of my modules failed to update while writing new settings to the car. (HU_ENTRY and DME).

Sorry for long post, I think that's because I'm an academic

 

By the way, are HU_ENTRY and HU_CIC two different things? Because I have HU_ENTRY as the module but when I get into the CAFD of HU_ENTRY, I see the module's name as HU_CICHB. What hardware do I have?

Yes, entirely. HU_CIC is for cars with 609 Nav Pro. HU_ENTRY is basic Head Unit for cars with no Nav. You will not be able to do much with ENTRY Head Unit. Sport Displays will not work, so forget them.

And why in the world are you coding DME with a new date? You are lucky your car didn't have to be hauled off to Dealer on a flatbed.

 

By the way, are HU_ENTRY and HU_CIC two different things? Because I have HU_ENTRY as the module but when I get into the CAFD of HU_ENTRY, I see the module's name as HU_CICHB. What hardware do I have?

 

Hi Shawn
I have a Euro spec X5 F15 build date February 2015.
Would you be able to send me the details that I need for coding please?
Thanks
Richard

 

PM sent.

 

Hi Shawn
I have a Euro spec X5 F15 build date February 2015.
Would you be able to send me the details that I need for coding please?
Thanks
Richard

 

Many thanks Shawn

 

Hi Shawn,I am worry about lost something I don't know,may I get a link to the last version of whole package for coding? Thank you.

 

PM sent.

 

Hi! I still trying to fix the nbt vin problem. It continues showing the same error (down pic)...
could it be a psdzdata problem? :dunno: Shanw, would you have some solution for this?
I've thought install hu_entry, code and reinstall nbt from the begining...

Any idea will be wellcome!

Thanks for your time

 

It is not a PSdZData error. Are you specifying Full VIN in Write VIN by Identifier popup Window?

 

uch:

I'll try later... Thank you :thumbup:

 

You were right, it worked. But navigation and media continue disable... I don't know why.
I'll check conections and code again

Thank you again!

 

April1:
This is an excellent write-up. Thanks.

 

Hi Shawn... I just got a 2015 X3 F25, is it possible for you to send me the details (software download links, files, etc) needed for coding? I've read through this thread for instructions but I would just like to make sure I won't turn my car into a brick. Thanks!

 

PM sent.

 

Model List for Coding

Shawn,

A really dumb question as I get ready to help someone with his X5, but can't seem to find the answer.

I know that for an F30, you use F20 in E-Sys, but would you be kind enough to provide some kind of table that "translates" BMW model for E-Sys coding, particularly X5?

Also, does one use the E-Sys listing without _DIRECT?

Thank you very much

 

Shawn,

A really dumb question as I get ready to help someone with his X5, but can't seem to find the answer.

I know that for an F30, you use F20 in E-Sys, but would you be kind enough to provide some kind of table that "translates" BMW model for E-Sys coding, particularly X5?

Also, does one use the E-Sys listing without _DIRECT?

Thank you very much

For F15 it is:

E-Sys Launcher Car Series - F15
E-Sys Connection Target = F25 (without _DIRECT).

 

Coding help

I'm thinking about coding my 2014 535i, I'm in SoCal. Is there a local member willing to help me? Don't want to do it solo ***128512; Thanks in advance.

 

That is my car vin, so I have to Expert Mode => FSC Extended module => WriteDataByIdentifierVIN,

Diagnostis Address (Hex) > 0x30??

 

That is my car vin, so I have to Expert Mode => FSC Extended module => WriteDataByIdentifierVIN,

Diagnostis Address (Hex) > 0x30??

Yes, but Diagnostic Address (hex) = 63 (99 in Decimal).

 

This is what I did sometimes, at HU_NBT appears WBAWY310900F25819, so, what is wrong? Maybe that isn't the donor vin and in that case, how can I know the real donor vin?
Sorry, I'm a bit confused

 

If you do not know Donor VIN, you are screwed. You will need to Import and Activate a whole new set of FSC Codes into HU that have a newer creation date than current set.

 

I don't know...
The NBT vin must be WBAWY310900F25819, I have updated NEXT maps with this vin (even I have the archives I used to update) so I don't understand what have I got to do to active FCS.
I wrote if it was possible a wrong vin to look for an explication, but I'm pretty sure this is the correct donor vin, and it has navigation, voice control... even apps.
So, maybe Am I doing something wrong? :dunno:

So write VIN 0F25819 back to NBT, and FSC Codes should be fixed.

 

So write VIN 0F25819 back to NBT, and FSC Codes should be fixed.

But It's write, I follow these steps: Expert Mode => FSC Extended module => WriteDataByIdentifierVIN,

Diagnostis Address (Hex) > 0x63
WriteDataByIdentifierVIN To right box, write the complete vin in capital leters an click start.

Something else?

 

First, forgive my ignorance if this is a stupid line of questions...I haven't traversed into coding, although I did read the step by step over a year ago. So I've been following this discussion between ermone & Shawn due to a recent conversation I had with my SA regarding the N63 CCP service interval adjustment. I was told they are unable to alter the oil service interval as it is factory set...which sounds similar to what Shawn is telling ermone about his NBT issue.

So, first off, is it true that the dealership can not change the oil service interval from 15k to 10k (I was under the impression that the CCP specifically stated this be changed)?

And why can't options (i.e. NBT vs CIC) be added to the vehicle's VIN? Are the hard coded somehow? Or am I misunderstanding the conversation about the donor VIN?

 

These are totally unrelated issues. His issue is that he altered his Head Unit VIN, which rendered his FSC Codes for Navigation, Voice Control, etc. "Rejected".

Now, to change Service Interval, FA (Vehicle Order) must be modified and then DME flashed. Dealers can't do this, but you could if you wanted to.

 

Hi Shawn,

I just delete "CAF" folder exists in "C:\Data\",and replace with the "backup CAF" folder to "C:\Data\"

after that I select CAFD show up Report-"1"Errors

Transaktions-Report: Aktion:Codierdaten lesen

CAFD_000016EE_113_107_017 Fehler:
CPS read from ECU "ECUId:IHKA3_0x78" failed! [C070]
negative response error:
code:TIMEOUT P2/T2 occurred
description2 timeout on Service RDBI_CPS has error in result:
[Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not
available][VendorCode=2142][VendorCodeDescription=P2 timeout occurred];
ECU: IHKA3_78_ETHERNET
severity:ERROR
[2130765072]
https://app.box.com/s/t4jjo3hcouvwlj3ac9nuod0sfzenecu9

How can I fix it? thank you!

 

I hope you are not trying to restore backed up coding data (.ncd) from old CAFD and restore to newer CAFD.

But as for your error, this is a Connection Parameter issue of some sort. Are you sure you are connected via VIN (not Gateway URL or ICO/Ethernet), and Connection Target is correct for your Chassis, and without the _DIRECT at end of it?

 

Hi shawn,
Thanks for all your help on this forum, greatly appreciate it!

With your help I was able to 99% sucessfully code my F30 328.

Only on one module there was an error but apparently even though it warned it was just fine.

But maybe not, i dont know.

Have you seen this before

Transaktions-Report: Aktion: FDL Codieren

ICM [1c]
cdDeploy FinishedWithError
cafd_0000067b-002_008_002 Finished

this is the log. I was modding the car to always start on ECO PRO on the ICM module and this finished with errors. any ideas?

 

Hi shawn,
Thanks for all your help on this forum, greatly appreciate it!

With your help I was able to 99% sucessfully code my F30 328.

Only on one module there was an error but apparently even though it warned it was just fine.

But maybe not, i dont know.

Have you seen this before

Transaktions-Report: Aktion: FDL Codieren

ICM [1c]
cdDeploy FinishedWithError
cafd_0000067b-002_008_002 Finished

this is the log. I was modding the car to always start on ECO PRO on the ICM module and this finished with errors. any ideas?

 

If you can VO code ICM without error, and only get error FDL Coding it, then it does not like the FDL parameters you have used.

 

I got a 2003 bmw 525i and my car is in limp mode, so I went to auto zone to get the code read, and the codes came up is p1763, p1085, p0174, p0171, my abs lights are on, could that make it go into limp mode? Anybody know how to tell me how to fix the codes?

 

I tried to do coding for the first time and this is what im getting. I attached a screen shot.

 

So either you are not using E-Sys Launcher 2.x, or you are and have it set for wrong Car Series.

 

Hey Guys. Newbe to this forum. Have a quick question.
I have what I believe is all the latest software. I can get most switches in the software to activate but there is one that is giving me trouble....Trying to have the doors unlock on engine off ....when I go to BDC 3040 - VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK = nicht_aktiv and try to change it there is no option to change it to aktiv - it is stuck on nicht_aktiv. I'm using v.56.5_PSdZData_Lite btw.
Any thoughts would be much appreciated.

 

Sorry removed double post!