BimmerFest BMW Forum banner

Griots Speedshine Vs Meguires Final Inspection

8174 Views 56 Replies 12 Participants Last post by  Guest84
These products are a quick spray on/wipe off product used to wipe a light layer of debris off your car, or used after washing to remove water spots. They will give the car a just washed appearance in about 10 minutes

Meguires markets a product similar to Speedshine under the names Final Inspection (available at paint shops and pro detailing stores) and Quick Detailer (available to the consumer at any automotive product retail chain)

I have been using the Meguires products for years and for the most part have been happy with them. However, lately I have noticed streaking when using their products. After using the product and in the right light it looked like my car (black) had streaks from a bad wipe job.

I figured I'd give the Griots a try and see if it did the same thing, or if it provided a higher luster finish.

Speedshine worked great! The application was the same as Meguires, spray on/wipe off seemed to come off without requiring additional wiping and left a shiny streak free finish.

My recommendation is to use Speedshine!

Once again Griots has produced a great car care solution!

:thumb:
See less See more
1 - 20 of 57 Posts
I've been using Final Inspection but didn't like the some time difficulty in getting it off (similar to your streaking). So I placed an order for Speed Shine on Saturday. Sounds like I made the right move:thumb:

I'm also the guinea pig for Alee so he can make the move:eek: Please don't tell Sal:rolleyes:
See less See more
Glad you liked it as much as I. In-d-haus turned me onto Griots back in June last year, and my wifes SUV was the guinea pig, very impressed then as I still am today!

Incidently, use Speed Shine with claybar, it acts a an excellent lubricant when claybarring.
The trick with Speedshine...

Is to not let it dry.
Re: The trick with Speedshine...

in_d_haus said:
Is to not let it dry.
Agreed! I spray it on, then use one cloth to "polish" it into the finish, and another to remove it.
LAST NIGHT!

I definately had a majot problem with the meguiars, as a 3/4 full bottle is now in my trash. I used (expiriemented) with it on my Toyota 4-Runner with no problems. Last night i used it on my week old just washed 330i to get off water spots and the D*** thing looked like it has swirls all over hood. I don't know what it was but it pissed me off. I had no damage though because I got this awful products side effects removed by a good waxing earlier tonight. The only thing that is strange to me is how the car was clean, i used 100% cotton towels that have never swirled before, and it was only noticeable on the hood and not on the doors. Weird, needless to say, i'm staying away from those products for awhile. I'm too scared i will do something that wont wax off!
See less See more
Re: LAST NIGHT!

k2modx3 said:
I definately had a majot problem with the meguiars, as a 3/4 full bottle is now in my trash. I used (expiriemented) with it on my Toyota 4-Runner with no problems. Last night i used it on my week old just washed 330i to get off water spots and the D*** thing looked like it has swirls all over hood. I don't know what it was but it pissed me off. I had no damage though because I got this awful products side effects removed by a good waxing earlier tonight. The only thing that is strange to me is how the car was clean, i used 100% cotton towels that have never swirled before, and it was only noticeable on the hood and not on the doors. Weird, needless to say, i'm staying away from those products for awhile. I'm too scared i will do something that wont wax off!
Was it Final Inspection or Quick Detailer? Quick detailer is definately something to stay away from:thumbdwn:
See less See more
Does the brand of wax used affect results?

I'm wondering if the brand of wax used would have any affect upon the detailing spray's results. That is, do you need to keep within the same manufacturer's line of products to get the best results?

I've been using Final Inspection with Meguiar's Medallion wax for years with no problems. However, I have a friend who tried using Final Inspection and it put pink swirls on his white paint.
See less See more
meguiars

It was quick detailer, and luckily i fixed it.
Re: Does the brand of wax used affect results?

awd330 said:
I'm wondering if the brand of wax used would have any affect upon the detailing spray's results. That is, do you need to keep within the same manufacturer's line of products to get the best results?

The "Rule of thumb" I've been told over the years is keep Carnauba-based products with carnauba waxes, and polymer-based products with polymer waxes.
See less See more
I used Mothers' Detailing Spray to maintian my P21s wax job and have never had a problem.
robg said:
I used Mothers' Detailing Spray to maintian my P21s wax job and have never had a problem.
Robg, most detailing sprays contain either a small amount of polymers or carnauba, do you know which they use? Just curious...
Rip-

I'm not sure. I'm pretty sure its carnauba but I'll check.
If you got scratches with Quik Detailer then:

1) Your car was too dirty when you used it
2) Your towels were to coarse

Quik Detailer is made to remove LIGHT contamination from the paint finish without scratching and without stripping your wax.

My advise would be for you to switch from using 100% cotton terry cloth towels to using microfiber. Just a thought.
See less See more
E36M3 said:
If you got scratches with Quik Detailer then:

1) Your car was too dirty when you used it
2) Your towels were to coarse

Quik Detailer is made to remove LIGHT contamination from the paint finish without scratching and without stripping your wax.

My advise would be for you to switch from using 100% cotton terry cloth towels to using microfiber. Just a thought.
Be very careful of those microfiber towels, with a jet black finish, I noticed little silvers of fiber (after many washings of the towel itself) left over on the finish, not sure if these could cause potential swirl marks, but I accidently dropped a cigar ash on a towel and it shirveled and melted the part of the microfiber towel it fell on...that is NOT a good sign. 100% cotton with 100% cotton thread for me.
See less See more
Guess it depends on the microfiber you're using...just with anything, they vary in quality.

Being in the industy I can tell you in confidence that microfiber is much safer than towels.
E36M3 said:
Guess it depends on the microfiber you're using...just with anything, they vary in quality.

Being in the industy I can tell you in confidence that microfiber is much safer than towels.
Great! Do me a favor, take a lighter to one of your towels, post the results please. (incidently, mine were bought from Griots Garage,they rave about them but I'm skeptical after the cigar ashe thing, as well as the 'fiber glass' looking fibers on the finish)
See less See more
I'll do that for 'you.'

However, I don't see the correlation between fire and microfiber. If you're trying to test quality and durabilty of a microfiber towel, that is better done through product tests such as:

-product stretching
-multiple washings
-multiple dryings
-frequency testing
See less See more
Its a known fact that certain synthetic fibers can cause micro swirls in a clear coat. One of the old "diaper" tests used to be to hold a flame near the corner of the material, if it shriveled and melted, then it was deemed to rough for applying wax to a clear coat. Seeing my cigar ashe 'shrivel' the micro towel I used made me cautious.
See less See more
I've heard of the test, but again, I don't feel that is a viable way to test the product quality of microfiber. I feel that is better done through some of the methods I listed earlier.

It's similar to the old "flame on the paint" tactic on the infomercials to test the durability of a wax. It's a marketing ploy that has a "wow" factor yet fails to fairly demonstrate how durable a product (or in this case, a wax) is. Pouring lighter fluid on your paint then lighting it on fire does nothing to prove wax durability. All it proves is that lighter fluid is a flammable liquid.

Across the board, microfiber (reputable quality) is much less prone to swirling and/or scratching paint finishes.
See less See more
1 - 20 of 57 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top