[Romezter]

I was trying to adjust my low beams I've already done this before. This time I adjusted the passenger side low beam all the way down just to see, and now the screw does not adjust. I tried searching but didn't find anything.

Sent from my iPhone using Bimmerfest mobile app

 

[khammack]

Sounds like you ran it down past the threads. I would try putting something like putty or tape on it and try pulling the screw up (using the tape or putty) while turning it to get the threads back together.

 

[Romezter]

Sounds like you ran it down past the threads. I would try putting something like putty or tape on it and try pulling the screw up (using the tape or putty) while turning it to get the threads back together.

Thanks I'll try that out and I'll post what happens

Sent from my iPhone using Bimmerfest mobile app

 

[khammack]

Thanks I'll try that out and I'll post what happens

Sent from my iPhone using Bimmerfest mobile app

Good luck. :thumbup: