BimmerFest BMW Forum banner

Headlight/turn signal adjustment

1187 Views 10 Replies 5 Participants Last post by  Dr. Phil
I installed OEM clears on my 2000 323Ci. The front corners are not flush with the headlights. Anyone know how to adjust for this?
1 - 4 of 11 Posts
It's in all the way alright (heard the click). A little too far in actually (I should have been more specific in original post). The bottom of the light is flush, but the top is about an 1/8" too deep.
robg said:
Hmm. You really shouldn't need to adjust anything. Try remvoing them and re-installing-- and make sure that the blinker is perfectly level and that all of the slots and tabs are ligned up w/ their mates before pushing it in and getting the "click". Sounds to me like its not seated correctly-- I think it might be possible to get the lights to click but not get the blinker to slide in in the proper way. Do you have the same problem on both sides?
Both sides are the same. Both lights slid in smoothly, no binding. However, getting it to "click" required a firm push. Maybe the problem is 2002 lights in a 2000. Anyway, would be nice to get them fit flush, but it won't kill me if they're not.
Re: Re: Re: Re: Headlight/turn signal adjustment

vexed said:

Busted!:rolleyes: Yes I owe to OS my soft, buttery, wonderful M3 wheel,:thumb:
Hey vexed, you get paid by the hour so get back to work!:lmao:
1 - 4 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.