You will need an esys launcher

 

Hello
I have E-sys installed and it works fine and I can see the ECUs.
What I don't know is what parameters I have to modify, encode activate/deactivate!

 

dipped and long bulbs.
I have put some Osram LEDs in the short ones and another Chinese brand in the long ones, I think also. I think those are the ones that give me the error!

Low/dipped beam (halogen headlights)
FEM > 3061 > AL_R_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > AL_R_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > AL_R_IS_LED: activ
FEM > 3061 > AL_L_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > AL_L_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > AL_L_IS_LED: activ

High/full beam (halogen headlights)
FEM > 3061 > FL_R_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > FL_R_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > FL_R_IS_LED: activ
FEM > 3061 > FL_L_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > FL_L_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > FL_L_IS_LED: activ

 

Low/dipped beam (halogen headlights)
FEM > 3061 > AL_R_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > AL_R_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > AL_R_IS_LED: activ
FEM > 3061 > AL_L_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > AL_L_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > AL_L_IS_LED: activ

High/full beam (halogen headlights)
FEM > 3061 > FL_R_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > FL_R_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > FL_R_IS_LED: activ
FEM > 3061 > FL_L_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > FL_L_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > FL_L_IS_LED: activ

Hello
I have already been able to encode the values you gave me 😎
I only had to search in section 3060 and not in 3061 and it worked.
I have to check for a couple more days to see if there are no more errors (so far everything is correct). Thank you👌😊