BimmerFest BMW Forum banner

HELP! E39 Speedometer not working.

1185 Views 15 Replies 10 Participants Last post by  JAircR4ft
Hi! Im starting to have a “panic attack,” not really but am definitely worried since my speedometer is not currently working. I have a 2003 530i. I recently had chewed wires on my headlight wiring harness so I bought a new one on eBay and replaced the whole harness from the box under the hood. The only issue is that harness also was the source of all of the wires to/from by ABS/DSC module. Everything is working fine except I have a “BRAKE” and “ABS” light as well as my Speedo and cruise control not working. At this point the only thing I’m worried about is the speedo. I have already looked through a bunch of forms and threads as well as schematics, I’ve also traced all of my speed sensors including the right rear sensor and re-spliced all of the wires. I’m starting to think it is something in between the ABS module and the cluster but I’m unsure what wires that is. Can anyone help? Pics below. Yes I know it’s sloppy, but it’s the only way I could do it with the resources I have.

Hood Motor vehicle Car Automotive design Automotive exterior
1 - 2 of 2 Posts
That is a message that there is a probkem in the abs module.
With flux and proper tinning , wires will solder fine . The flux cleans tye wire , abd allows it to accept the solder .
1 - 2 of 2 Posts
Top