BimmerFest BMW Forum banner

Help on bleeding brakes

3446 Views 11 Replies 6 Participants Last post by  DrBimmer
Put 330i brakes on my 323ci along with stainless steel brake lines, my pedal is now too soft. do I need to rebleed the system or put on a 330i master cylinder. If I rebleed has anyone used a vacum system, what special steps should I take, or is the use of a pressure bleeder the only way to bleed the lines.
1 - 1 of 12 Posts
Re: Bleeding Brakes according to Bentleys

VT325Xi said:
Quote from the "Caution":

E46 cars require special BMW service equipment to properly bleed either ABS/ASC or the ABS/DSC system. For safety reasons the brake system on these cars must not be bled without the use of a factory diagnostic computer
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.