I am trying to code the alarm module on an E61. This alarm was installed by the dealer after the car was sold, many years ago.
Unfortunately I think they installed an E63/E64 module, and it is not accessible with standard NCSEXPERT settings.
-the alarm works, the siren is the engine bay
-302 is not in the VO option list
-ISTA sees a DWA module and can talk with it
![]()
-INPA can talk to it if I select E60/Body/Alarm System E63-E64
![]()
-but there is no response if I select DWA siren and tilt sensor under Body
![1026771]( "1026771")
some more information from INPA
![]()
![]()
![]()
![]()
![]()
This is the list of modules NCSEXPERT lets me access (without 302 in the VO), DWA is missing.
![]()
If I add $302 to VO (CAS and LMA), DWAI and DWAS appear, but NCSEXPERT cannot communicate with them. ISTA will also see a new SINE module, but cannot talk to it.
![]()
I am using the latest daten (v.68).
Is there any way to code this DWA_63 module?
thanks
Unfortunately I think they installed an E63/E64 module, and it is not accessible with standard NCSEXPERT settings.
-the alarm works, the siren is the engine bay
-302 is not in the VO option list
-ISTA sees a DWA module and can talk with it
-INPA can talk to it if I select E60/Body/Alarm System E63-E64
-but there is no response if I select DWA siren and tilt sensor under Body
some more information from INPA
This is the list of modules NCSEXPERT lets me access (without 302 in the VO), DWA is missing.
If I add $302 to VO (CAS and LMA), DWAI and DWAS appear, but NCSEXPERT cannot communicate with them. ISTA will also see a new SINE module, but cannot talk to it.
I am using the latest daten (v.68).
Is there any way to code this DWA_63 module?
thanks
