Step 1. Change FA from 6NH to 6NS:Are you able to provide some step by step instructions to do this.
I already have the cable, esys etc and have done some coding on my car but I want to enable the extended Bluetooth on my wife's F25.
Since 6NH is standard Equipment for ALL F15 builds, the 6NH Option Code does not appear in the VO. E-Sys and ISTA will know to encode it for 6NH based on the Chassis Code and Build Date. In contrast, cars where Basic Bluetooth isn't even standard equipment and the car comes equipped with 6NH, the Option Code will appear in the VO.Hi guys
I'm just going to do this coding on my F15 (via ECU rather than SVT due to other well documented issues!) but i have run into another issue.....
When I look at the FA list I don't have option 6NH! I have 6NR (apps I think) but no other 6N option.
Should I just add 6NS?
I obviously have the standard Bluetooth and USB audio (which I think is 6NH) so don't understand why it isn't listed??
Could it cause any issues if I add 6NS? Or would it just not work and worse case I just delete and recode?
Sent from BimmerApp mobile app
No. Just 6NS, not both.I went through the steps and edited the VO by changing the 6NH in SALAPA elements to 6NS. ie I edited the H to be an S.
I then coded the ECU etc.
Now the office menu appears and it shows SMS messages but there is no option for showing Bluetooth streaming.
What else do I need to do? Pair the phone for Bluetooth again? Code something else? Add 6NS into the SALAPA elements along with 6NH?
Combox is built into NBT Head Unit, so you have no standalone CMB_MEDIA.Still no luck with the full enhanced Bluetooth.
Unpaired and repaired the phone and no difference.
Went to VO code CMB_Media but could see no such thing so did HU_NBT again.
Can see the office menus etc but when you configure the Bluetooth devices the only option is Telefon and not audio and data etc so no Bluetooth streaming etc.
Do I have to code anything in the HU_NBT to make it work. What am I missing?