Bimmerfest BMW banner

1 - 11 of 11 Posts

·
Registered
Joined
·
1,053 Posts
Discussion Starter #1 (Edited)
Hello fellows sorry if been discussed before. I have F36 with 19” wheels and was wondering if I can go 235/40 in the front and 265/35 in the rear. Thanks
 

·
Registered
Joined
·
330 Posts
OP. If you downsize to 18's I know you can run 245x40's no problem. I race with RE71's on a square set of 18 x ET35's. Zero rub.
 

·
Registered
Joined
·
10 Posts
I currently have a 2016 328ix AWD with 225/40-19 Fr and 255/35-19 RR tires. I would like to go to a square 245/40-19 and am wondering if the difference in wheel diameter/circumference is allowable by the electronics and wheel well space. If I use 245/35-19 all around it looks like the sidewall will be even thinner than stock and I worry about this on rough paved and gravel roads. Also, the current setup gives me too much understeer. Would the change to 245 square get rid of this, or should I keep the original tires sizes and get front adjustable camber caps and use -2* camber?
Any ideas?
 
1 - 11 of 11 Posts
Top