BimmerFest BMW Forum banner
1 - 2 of 2 Posts

· Registered
50 Posts
Discussion Starter · #1 ·
Yes, I broke down and changed my oil @ 5300 miles. 7900 to next change per the computer - so BMW will perform the next @ 11000. I used an oil extractor and it worked perfect. Removed 6 quarts which were replaced with Mobil 1.

I was less than perfect. I used an open-end wrench to take off the oil filter cap and gouged it. Very unprofessional. Worse yet, I own a 36mm socket and torque wrench which I used to put the cap back on.
So, does anyone know the part number for the oil filter cap? Probably not cheap.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.