BimmerFest BMW Forum banner

New trick for body lines

672 Views 2 Replies 2 Participants Last post by  in_d_haus
Ok so after washing the car I've always struggled with getting all the water out of the body lines, mirrors, and in the lights. Even stuffing the Chamois into the crevices never totally dried it out.

I don't know how many times I sat back looking at my car just to watch water glurg out of the mirror or a taillight down the side of my nice clean car....:mad:

I was tempted to buy a small compressor to blow it out.

Today as I was Speed Shining the car I came up with the idea to use my wet/dry vac to suck the water out and VOI-LA!!! no more water!!!! :D

Try it!
Haus
1 - 3 of 3 Posts
That's a good idea, especially if your wet/dry vac has a plastic end on it.

Personally I've always used compressed air whenever I have it, which works pretty well too.

--SONET
I didn't even have to touch the surface for the vacuum to do it's work but yes it is plastic tipped.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top