BimmerFest BMW Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
I have a BMW 3 Series E63 318i (Built December 96 but according to the plates it's a 97 model) and it won't start.

I am not getting spark on any of the spark plugs

I have Fuel Pressure and the starter motor is turning over. I have checked all of the connections, sensors and the ECU and they are all fine. I haven't checked the relays. I'm not sure how.

I tested the coil pack resistance and all connections say 1.3ohms except there is a pin that reads 0.8ohms and one that reads nothing.

So if anyone one knows a possible problem that would be great! If not I'd like to know if I can read the diagnostic codes from the dash. And if that's not possible what would be a recommended Scan tool/code reader?
 
1 - 2 of 2 Posts
Top