BimmerFest BMW Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
So i have all new bulbs for the tail lights and also license plate lights but the car still shows that it has lights out I'm not sure why dose anyone else have this problem or have had this problem?
 

·
Freude am Fahren
Joined
·
6,378 Posts
Check your third taillight***8230;

If you don't use BMW nickel-based bulbs errors probably will continue to be thrown. The LCM is very sensitive to resistance.
 

·
Registered
Joined
·
4,278 Posts
I had the sensor go off with a new bulb once. It was due to some wear/corrosion on the contact in the socket. I bent it slightly off center for the non-corroded area to get better contact with the bulb and that took care of it. If only one bulb is giving problems, you could try switching bulbs or trying another new one.
 
1 - 3 of 3 Posts
Top