BMW Forum - BimmerFest BMW Forums banner
Cancel
Create thread New Garage Forums

PSdZData FULL Requests (Programming Firmware)

Fxx-/Ixx-/Gxx-series
2 reading
Jump to Latest
1.1M views 11K replies 3.9K participants last post by  shawnsheridan  
#1 · (Edited by Moderator)
Hello,

I have version 57.3

Is there a newer version?

What is the newer version?

What does it give over the older version?

Most important, is it needed for a 2016 M3?
 
  • Like
Reactions: stiga77, SamuraiAU, VengeanceDemon and 17 others
Save
Reply Quote Like Like
A
#7,541 ·
Having trouble Detecting CAF for SWE in my F15 X5 (2015) for a brand new AAG module. A few other posts suggest flashing the AAG but I think that requires PSDZ full if I understand it correctly. If possible, can I get a link to the latest full data?
I'm a relative ESYS novice so it's entirely possible I'm doing something wrong.... but have read/activated FA, added 3AC to FA, written FA to vehicle, read SVT(ECU from known F15 issue). I can see the AAG module in the tree without CAFD but that's when it fails to detect CAF, hence my question. Haven't tried the TAL yet (it was late, I was tired and didn't want to brick anything from further diminished mental state, etc)

Side question, the several iterations of PSDZ lite files that I have do not have anything in the SWFL folder (c:\data\psdzdata\swe\swfl\) but I'm able to detect CAF for SWE for other modules already in the vehicle (latest is 4.35.21, with link from sticky on this forum). Is this normal where the SWFL files are calculated as accessed, etc?

EDIT running ESYS 3-33-4 with no launcher. Had previously used EsysX and have that installation on my computer but seems that's NLA.

Thanks,
Andy
 
#7,542 ·
amesser325 said:
Having trouble Detecting CAF for SWE in my F15 X5 (2015) for a brand new AAG module. A few other posts suggest flashing the AAG but I think that requires PSDZ full if I understand it correctly. If possible, can I get a link to the latest full data?
I'm a relative ESYS novice so it's entirely possible I'm doing something wrong.... but have read/activated FA, added 3AC to FA, written FA to vehicle, read SVT(ECU from known F15 issue). I can see the AAG module in the tree without CAFD but that's when it fails to detect CAF, hence my question. Haven't tried the TAL yet (it was late, I was tired and didn't want to brick anything from further diminished mental state, etc)

Side question, the several iterations of PSDZ lite files that I have do not have anything in the SWFL folder (c:\data\psdzdata\swe\swfl\) but I'm able to detect CAF for SWE for other modules already in the vehicle (latest is 4.35.21, with link from sticky on this forum). Is this normal where the SWFL files are calculated as accessed, etc?

Thanks,
Andy
Click to expand...
PM sent.
 
  • Like
Reactions: amesser325
Save
Reply Quote Like Like
#7,543 ·
Hi,

The installation and connection suceeded with E-Sys v.3.27.1 and E-Sys Launcher PRO 2.8.2_Build_162b BFU Edition.

After cross referencing Bimmercode, I was unable to search the same control unit in E-Sys.
It seems that my installed E-Sys only showing digital numbers and not translated.
After searching the forum, maybe I need to approach another route newer E-Sys and Bimmerutility maybe?

Trying to enable Lane Change Assistant C_SWA_Vorhanden
Car Model: 2022 x3 g01
 
#7,544 ·
mesabogii said:
Hi,

The installation and connection suceeded with E-Sys v.3.27.1 and E-Sys Launcher PRO 2.8.2_Build_162b BFU Edition.

After cross referencing Bimmercode, I was unable to search the same control unit in E-Sys.
It seems that my installed E-Sys only showing digital numbers and not translated.
After searching the forum, maybe I need to approach another route newer E-Sys and Bimmerutility maybe?

Trying to enable Lane Change Assistant C_SWA_Vorhanden
Car Model: 2022 x3 g01
Click to expand...
I replied to your same PM. You have 2022 x3 G01 . It's too new and not mapped in Launcher PRO. You need BimmerUtility.
 
Save
Reply Quote Like Like
#7,564 ·
Save
Reply Quote Like Like
#7,569 ·
Rossi76 said:
Hello, can anyone help me please with psdzdata full 4.20.30 or 4.21.12 - Need S18A-19-11-534 flash files for esys.
Many Thanks
Click to expand...
Sorry, old versions not maintained.
 
Save
Reply Quote Like Like
#7,582 ·
  • Like
Reactions: LeXeS and carlosmpz
Save
Reply Quote Like Like
#7,577 · (Edited)
hi Shawn
do you have those files of CMB_MEDIA as below
i maked my combox no work with wrong swe
now CMB_MEDIA complained
and also make the CMB_ECALL died in ista function tree

i need old version to revert it
buy i just have files of new level

i guess i have two options
one is just get those files and put them into swe and code my combox?
another is i get full files such as all swe of F010-15-11-503

if option one can work, can you PMme the files
or can you PM me the full version that have those files

Image
 
#7,581 ·
Rex Chen said:
hi Shawn
do you have those files of CMB_MEDIA as below
i maked my combox no work with wrong swe
now CMB_MEDIA complained
and also make the CMB_ECALL died in ista function tree

i need old version to revert it
buy i just have files of new level

i guess i have two options
one is just get those files and put them into swe and code my combox?
another is i get full files such as all swe of F010-15-11-503

if option one can work, can you PMme the files
or can you PM me the full version that have those files
Click to expand...
No, sorry, old version not maintained. I have always only the latest.
 
Save
Reply Quote Like Like
BMW Forum - BimmerFest BMW Forums
posts
12M
members
799K
Since
2001
A forum community dedicated to BMW owners and enthusiasts. Come join the discussion about Bimmerfest events, BMW production numbers, programming, performance, modifications, classifieds, troubleshooting, maintenance, and more! Bringing the BMW community together.
Full Forum Listing
Explore Our Forums
E90/E91/E92/E93 (2006 - 2012) E39 (1997 - 2003) E46 (1999 - 2006) E36 (1991 - 1999) E60 / E61 (2004 - 2010)