Bimmerfest BMW banner

4921 - 4940 of 5441 Posts

·
Premium Member
Joined
·
39,465 Posts

·
Premium Member
Joined
·
39,465 Posts
Hi Shawn,
could you please send me the link for the latest psdzdata lite please?
Thanks!
Wrong Thread. As Thread Title, "Fxx-/Ixx-/Gxx-series PSdZData FULL Requests (Programming Firmware)", indicates, it is for PSdZData Full, not Lite. PM sent.
 

·
Premium Member
Joined
·
39,465 Posts
Sorry i couldn´t find a thread for the Lite data.
Is there even one?
The latest software thread only links to this thread.
That thread contains PSdZData_Lite_v4.21.32.7z. Unless car was just programmed with v.4.22.41, which is most unlikely, than v4.21.32 would be fine to use. PSdZData used must only be >= to current version on car.
 

·
Registered
Joined
·
49 Posts
That thread contains PSdZData_Lite_v4.21.32.7z. Unless car was just programmed with v.4.22.41, which is most unlikely, than v4.21.32 would be fine to use. PSdZData used must only be >= to current version on car.
How can you tell what version your car was programmed with?. The "I-Level" looks like it's a completely different type of number.
 

·
Premium Member
Joined
·
39,465 Posts
How can you tell what version your car was programmed with?. The "I-Level" looks like it's a completely different type of number.
I-Step Current must be cross referenced to ISTA PSdZData number.
 

·
Premium Member
Joined
·
39,465 Posts
i-level is s18a-19-11-550, and psdzdata number is 4.21.32. How, or where, are they cross-referenced?
s18a-19-11-550 = ista 4.21.31.
 

·
Premium Member
Joined
·
39,465 Posts

·
Premium Member
Joined
·
39,465 Posts
Oh I see, so it's just a case of seeing the I-level is there in the connect dialogue?
That or find a cross reference table. It's not all that important. If you can't read an ECU because you have "Missing CAFD" error, then you need newer psdzdata. Otherwise, the psdzdata you have is fine.
 

·
Premium Member
Joined
·
39,465 Posts

·
Premium Member
Joined
·
39,465 Posts
4921 - 4940 of 5441 Posts
Top