Hi Shawn!

Please send me also link for PSdZData full and Lite version. If newer updated file is available for how to update ECU firmware then info for that would be also awesome. I have NBT unit 2014. E-sys 3.27.1 and enet cable.

Thank you!

 

You need to enable your PM function, and then send me one.

 

BMW g05 trimmed

Hi, with the help of the links provided by Shawnsheridan, I successfully installed Esys 3.27 with launcher and I managed toclear some error codes i Had due to the installation of a dash camera

i also savedmy original CAFs

But when it came to FDL coding I could not do it because I was not able to read the description of the different items, all of them sid they were trimmed

I tried HU_MGU and the BDC_BODY3 ECUs, without success
I wanted code video in motion and some of the Eco/Sport modes

What am I doing wrong

regards

 

Hi, with the help of the links provided by Shawnsheridan, I successfully installed Esys 3.27 with launcher and I managed toclear some error codes i Had due to the installation of a dash camera

i also savedmy original CAFs

But when it came to FDL coding I could not do it because I was not able to read the description of the different items, all of them sid they were trimmed

I tried HU_MGU and the BDC_BODY3 ECUs, without success
I wanted code video in motion and some of the Eco/Sport modes

What am I doing wrong

regards

Wrong Thread. Thread is for PSdZData Full, and nothing more.

I replied to your same PM.

 

i guess this belongs to different thread. but first... we need to know what kind of car are you talking. Then you should know, that some old launchers, doesnt support some CAFD files from new cars, and stayed trimmed.

 

sorry., I forgot to say it's a new BMW X5 (G05) 4.0 i, so I assume that is the problem.

Will post again in the right thread

regards

 

Hello Shawn, could I please get the link to the latest psdzd full? Thanks in advance!

Just a short side-question - does anybody know if EsysX stays okay when I replace the psdzdata with a later version (no reactivation necessary)?

 

PM sent. ESysX stays fine.

 

Thank you Shawn! You're so fast!!

 

Could you please share the link for PsdZdata? Thank you.

 

PM sent.

 

PSdZ latest files request. Shawn I PM***8217;d you, I apologize if we were supposed to just request in here, but I asked a few more questions in the Pm. I appreciate your time.

 

PSdZ latest files request. Shawn I PM'd you, I apologize if we were supposed to just request in here, but I asked a few more questions in the Pm. I appreciate your time.

PM sent.

 

Shawn,

I have 2011 F10 and had to replace RDC module. Now I need to flash the RDC module and while doing so using esys 3.27 I get the error that 'No CAFD-MAPPING for base variant RDC found' when I click on 'detect CAF' for RDC. Please find the image attached.

What exactly do I need to do ? This seems to be more than updating the PSDZ data file.

Thanks
Anmol

 

RDC Module, like ZGW, has no CAFD. It is not a codeable ECU. It can only be flashed.

Why are you wanting to flash it?

 

Could you please share the link for PsdZdata?

 

There is a error in the 'TMPS Malfunction'. How can it be flashed in order to remove this error from CIC.

PM sent.

E-Sys - Flashing ECU Guide v.1.0.1.pdf:
https://mega.nz/#!p9JQhAwZ!JJ9ptw8Titz8tZbLobnZ61g5uAJjkJcnSUvG81nYMsw

NOTE: Injecting CAFD and Flashing ECU's with >= v.4.17.20 PSdZData require using newer E-Sys 3.33.x:

 

Could you please share the link for PsdZdata? Thank you.

 

PM sent.

 

Hi Shawn
Could you please share the link for PsdZdata? Thank you in advance

 

PM sent.

 

hi! is there any thread for the psdz data lite request?? Thanks

 

It's Linked in the Sticky Post for "Fxx-/Ixx-/Gxx-series Coding: (No Request) Latest Software Links":

https://www.bimmerfest.com/forums/showthread.php?t=983244

 

Sdp vs psdz

Hey guys, I'm running out of disk space here. At one point I downloaded a complete package including SDP 4.13.11.

Now I've recently been given a link via PM for v.4.18.33_PSdZData_Full.rar. Is SDP the same as PSdZ ? Can I erase the old psdz folder created from extracting SDP files into the Rheingold folder and replace with the new PSdZ data ?

My purpose is to have an all around capable laptop. ISTA+, ISTA/P, and E-Sys (including for updating modules).

Do I need the psdz data in both "C:/data" for E-sys and inside of Rheingold folder as duplicates? Can I just link E-sys to look for the data files inside the rheingold folder? Should I do the file linking with that one program that more or less creates a virtual shortcut to whereever the psdz data is stored so both programs can access it?

Does ISTA/P also look for PSdZ data location in order to work properly?

Sorry I know that is a lot of questions, but I know that my level of confusion can be sorted out with a few sentences.

Thank you in advance!

 

Hey guys, I'm running out of disk space here. At one point I downloaded a complete package including SDP 4.13.11.

Now I've recently been given a link via PM for v.4.18.33_PSdZData_Full.rar. Is SDP the same as PSdZ ? Can I erase the old psdz folder created from extracting SDP files into the Rheingold folder and replace with the new PSdZ data ?

My purpose is to have an all around capable laptop. ISTA+, ISTA/P, and E-Sys (including for updating modules).

Do I need the psdz data in both "C:/data" for E-sys and inside of Rheingold folder as duplicates? Can I just link E-sys to look for the data files inside the rheingold folder? Should I do the file linking with that one program that more or less creates a virtual shortcut to whereever the psdz data is stored so both programs can access it?

Does ISTA/P also look for PSdZ data location in order to work properly?

Sorry I know that is a lot of questions, but I know that my level of confusion can be sorted out with a few sentences.

Thank you in advance!

You want to share the Full psdzdata from ISTA+ to Esys using a Symbolic Link as follows:

1) Delete PSdZData Subfolder from C:\Data Folder (i.e. c:\Data\psdzdata\)
2) Run CMD as administrator
3) Write - mklink /j "c:\Data\psdzdata\" "C:\Program Files (x86)\BMW\ISPI\TRIC\ISTA\PSdZ\data_swi\psdzdata\" <---(put your own directories)

ISTA/P doesn't use PSdZData. It is for E-Series Programming only, so it uses SP-Daten instead.

 

possible to receive the latest psdzdata files? thanks in advance!

 

PM sent.

 

Can I get the latest latest psdzdata files

 

PM sent.

 

@Shawnsheridan,

Thanks for the prompt response. Am downloading the PsdZData now.

Again, pardon my ignorance, but, as I said, have been off the forum for a bit. What do you mean by "Update Launcher PRO 3.x to the latest via the Launcher App". I have Launcher Pro App check box for "check for Updates" checked, but it doesn't seem to do anything? Is there something else?

Appreciate your assistamce!

 

Latest is LauncherPROSetup_3.5.1.261. If it won't let you update to it, I have no idea why.

 

Could I get the latest PsdZData? Also, where would I go to find the latest ISTA+ files? Thanks!

 

PM sent.

Thread is for PSdZdata Full, and nothing more. Sorry, I cannot help with ISTA.

 

@ShawnSheridan

Hello Shawn,

do you have a link to older PSdZ-Data? Alternatively, can you give me a link with the oldest PSdZ-Data you have available?

Many thanks

 

No. Old versions not maintained. Oldest I have is the latest.

 

@ShawnSheridan

Hello Shawn,

do you have a link to older PSdZ-Data? Alternatively, can you give me a link with the oldest PSdZ-Data you have available?

Many thanks

 

Hi,

I would be very greatfull if could also get the link.

Could you verify that I should be able to update I level with latest psdz and e-sys 3.33?

Best regards

 

Yes, possible. PM sent.

 

Hi.
Apologies in advance but a total newbie here. Have read through countless forums and pages of this and think i have my head around some of it. Ok so I got my F33 428i Convertible la couple of weeks back and wanted to try program some comfort features. I bought a cable and it came with the E-SYS software (3.27.1) i installed this and tried making some changes - i successfully managed to turn off the seat belt reminder, i did try to turn on Video from USB playback but that hasnt worked, but more importantly i wanted to be able tp fold mirrors with the key when locking and unlocking. I found the FEM_BODY and tried to read the CAFD file but it came up with the error "CAFD_00000794_017_068_102 not found"

Does anyone know a solution for this? or how i can program the mirrors?

I also wanted to ask if there was a way that i could operate putting the roof down or up just from the key? I used to hav a 330 which allowed me to do it from the key but in the 428 it doesnt seem like this is possible?

THanks in advance!

 

...,I found the FEM_BODY and tried to read the CAFD file but it came up with the error "CAFD_00000794_017_068_102 not found"...

Update your PSdZData. PM sent.

 

Hi Shawn,

Can I get the latest Full psdzdata?

Thanks in advance

 

Hi Shawn,

Can I get the latest Full psdzdata?

Thanks in advance

 

PM sent.

 

Hey also a coding noob here, getting ready to attempt to enable iDrive Touch features on my NBT HU in my 2013 F10 M5. Just grabbed E-SYS but need the latest PSDZDATA. It seems that shawnsheridan is the man to ask about this file.

So, Shawn, would it be possible to get a link to the latest files from you?

Thanks in advance!

 

PM sent.