BimmerFest BMW Forum banner
1 - 1 of 1 Posts

· Registered
3 Posts
Discussion Starter · #1 · (Edited)
Anybody know how to program a remote on a 96 Z3? When I bought the car it didn't come with a spare remote. I recently came across a used remote and the programming instructions don't seem to work.

They where, if it helps, have all doors closed, open the trunk and leave it open, get in the drivers seat and close the drivers door, turn the ingnition from off to position two 5 times. Then you should hear the alarm chirp and press and button on the remote. Get out of the car, leave the driver door open and close the trunk.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.