BimmerFest BMW Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
3,358 Posts
Discussion Starter · #1 ·
Do you have a picture and dimensions for 51.1.130? Looks like it's just a long allen-bit socket. What size? TIS says 'WAF 14', what does that mean? 14mm? The hex in the bumper height adjuster looks smaller than 14mm to me, like maybe 12mm. It's bigger than 10mm. Do you have the tool on hand?
 

·
19,585 Miles
Joined
·
11,141 Posts
dwm said:
Do you have a picture and dimensions for 51.1.130? Looks like it's just a long allen-bit socket. What size? TIS says 'WAF 14', what does that mean? 14mm? The hex in the bumper height adjuster looks smaller than 14mm to me, like maybe 12mm. It's bigger than 10mm. Do you have the tool on hand?
Stay tuned.
 

·
19,585 Miles
Joined
·
11,141 Posts
dwm said:
Do you have a picture and dimensions for 51.1.130? Looks like it's just a long allen-bit socket. What size? TIS says 'WAF 14', what does that mean? 14mm? The hex in the bumper height adjuster looks smaller than 14mm to me, like maybe 12mm. It's bigger than 10mm. Do you have the tool on hand?
I have the tool. It is 14 mm. See pic. I'll sell you mine for $20 priority mail shiping with tracking included. When I purchased it, it retailed for $18.90.
$23.39 today plus shipping from Jay.
You can make your own with a hex key and socket.

For those that don't know.
Tools are 30% margin plus sales tax from the dealers state regardless of where you are.
So a $100 tool with a net plus 10% account, it would be $77 plus 9.5% from Jay in TN = $84.32 plus shipping.

 

Attachments

·
Registered
Joined
·
3,358 Posts
Discussion Starter · #4 ·
Thanks very much Ron!


I have a long-bit socketed 14mm. I'll give it a try.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top