BimmerFest BMW Forum banner
1 - 3 of 9 Posts

· Sleek Sam
Joined
·
3,626 Posts
without pulling off the wheel, you can look inside the top are of your rear inner fender towards where the splash guard wraps around the strut. Look super carefully to see if you see a coil spring or not. Remeber to look super, super carefully before you end up ordering the wrong kit.
 

· Sleek Sam
Joined
·
3,626 Posts
Yes there is a coil spring, but the drop kit for the self leveling also has coil overs for the back thats why i got confused.

Sent from my DROID RAZR using Bimmer App
Which drop kit are you going with? Both Eibach and H&R only comes with the front springs for vehicles which have self leveling. Since you say that you see a rear coil spring, your vehicle does not have self leveling.

If your going with true coilovers on a self leveling vehicle, you have 2 options. A. use just the front coilver and adjust the rear down or B. Use both the front and rear coilovers and get rid of the self leveling.
 

· Sleek Sam
Joined
·
3,626 Posts
Is your car dropped? Which brand does everyone recommend? I have 3piece 22x11 305/25/22 -22x9 265/25/22 i dont want anything to rub.

Sent from my DROID RAZR using Bimmer App
Rubbing will ultimately come down to the offsets of your wheels and the particular tires you are running.

As for lowering methods, it comes down to how you want it to sit, and how much money your willing spend. If your looking just to get rid of some of the tire to fender gap, most people just replace the springs. And yes, my car is dropped.
 
1 - 3 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top