Bimmerfest BMW banner

1 - 20 of 14757 Posts

·
Moderator
Joined
·
2,520 Posts
Discussion Starter #1 (Edited by Moderator)
Hello Guys,

Due to the recent developments, we cannot have a public links to the software downloads.
We are just being cautious.....

Let the findings keep going.


If you have any questions let us know.... anyways we all know how to get hold off ;)
 

·
Registered
Joined
·
36 Posts
Also new to this whole scene- Basically wanting to get hold of the software capable of programming my e90 318i (2008 model)

Any help would be appreciated (oh and if you know a good place to get a suitable cable, that would be great!) Bearing in mind I live in NZ, so someone who ships internationally would be good :)
 

·
Premium Member
Joined
·
39,440 Posts
Also new to this whole scene- Basically wanting to get hold of the software capable of programming my e90 318i (2008 model)

Any help would be appreciated (oh and if you know a good place to get a suitable cable, that would be great!) Bearing in mind I live in NZ, so someone who ships internationally would be good :)
Well, here is the cable you need:

http://www.one-stop-electronics.com/shop/index.php?dispatch=products.view&product_id=16

I have PM'd you what you need for software.
 

·
Registered
Joined
·
36 Posts

·
Premium Member
Joined
·
39,440 Posts
THanks mate, much appreciated.

That cable is looking a little more expensive than I was hoping when you factor in shipping to NZ (unfortunately we get stung quite a bit).

Any chance that this would fit the bill? The specs look mostly the same..
Yes, that is also K+DCAN Cable. In theory it should be fine, but I have no idea on the build quality.
 

·
Premium Member
Joined
·
39,440 Posts

·
Registered
Joined
·
21 Posts
Im too am new to this coding business and would like to get all the current software can some help me out please i got the trans module up and programed but engine and etc i get error when trying to select and other modules too please
i know my car is old but new too me :rofl: its a 2002 745i n62 engine i did a lot of work too it ex owner never took car of it. email is [email protected] thanks for all the help.
 

·
Premium Member
Joined
·
39,440 Posts
Im too am new to this coding business and would like to get all the current software can some help me out please i got the trans module up and programed but engine and etc i get error when trying to select and other modules too please
i know my car is old but new too me :rofl: its a 2002 745i n62 engine i did a lot of work too it ex owner never took car of it. email is [email protected] thanks for all the help.
PM sent.
 

·
Registered
Joined
·
1 Posts
Bmw coding and programming devices

Can anybody guide me from where to buy Icom a,b,c?
What is the price for original equipment?
Should anyone trust china copies?:)
 

·
Premium Member
Joined
·
39,440 Posts

·
Premium Member
Joined
·
39,440 Posts

·
Registered
Joined
·
2 Posts
2009 e70

Hi Shawn,

I'm looking for the coding software for a CIC Retrofit kit for a 2009 X5...I also need help with the coding and wanted to know if you charged and how much.

Thanks,

Donjuan713
 

·
Premium Member
Joined
·
39,440 Posts
Hi Shawn,

I'm looking for the coding software for a CIC Retrofit kit for a 2009 X5...I also need help with the coding and wanted to know if you charged and how much.

Thanks,

Donjuan713
Sorry my friend, but I know very little about Exx Coding. All I know is Fxx.
 

·
Premium Member
Joined
·
39,440 Posts
Hi guys,

Got my Cable, but cannot seem to find software. Can anyone point me in the right direction. Thanks.
Also looking for the software.
PC and MAC
Thanks.
Hi Shawn

I've got a 11/2012 F30. Just ordered the Shenzhen Zeus ICOM A cable and already have the ESYS cable.

Can you help me out with the latest E-SYS / PSdZData and ISTA VMs please?

Thanks

pix
PM's sent.
 

·
Premium Member
Joined
·
39,440 Posts
1 - 20 of 14757 Posts
Top