[shawnsheridan]

Hi Shawn,

Yes i am, but have also tried :

E-Sys Launcher Car Series = F013
E-Sys Connection Target = F020

After F010 didn't work and it also gave me the same error

Thanks

Something is not right. I would uninstall, and reinstall all again, using the latest (E-Sys 3.27.1 and 59.4 PSdZData).

 

[ed2111]

Coding for G series

Has there been any success in coding the G series?
I've used E-SYS launcher v3.26.1. I was able to see some of the modules and access parameters, trying to code the Video In Motion. The parameters would save and the FDL coding for that module would complete successfully but the DVD or Video in Motion would not work.

THe other modules i'm trying to change are folding mirrors and other simple stuff.

Has anyone been able to code a 2016 7 series? Do I need some updates or are we still waiting on files to be released?

Thanks.

 

[shawnsheridan]

Has there been any success in coding the G series?
I've used E-SYS launcher v3.26.1. I was able to see some of the modules and access parameters, trying to code the Video In Motion. The parameters would save and the FDL coding for that module would complete successfully but the DVD or Video in Motion would not work.

THe other modules i'm trying to change are folding mirrors and other simple stuff.

Has anyone been able to code a 2016 7 series? Do I need some updates or are we still waiting on files to be released?

Thanks.

You need to use E-Sys Launcher Pro, not Premium, as TokenMaster has not yet added G-Series support to Premium version.

But even then, Video-In-Motion coding is not working in G-Series NBT2 EVO.

 

[icuc]

You need to use E-Sys Launcher Pro, not Premium, as TokenMaster has not yet added G-Series support to Premium version.

But even then, Video-In-Motion coding is not working in G-Series NBT2 EVO.

Video in motion was working on G series up to 40 miles speed and i will be coding the SPEEDLOCK_SPEEDVALUE to nicht_aktiv to test for max speed soon.

 

[TyroneShogun]

Something is not right. I would uninstall, and reinstall all again, using the latest (E-Sys 3.27.1 and 59.4 PSdZData).

Hi Shawn,

PM Sent.

 

[shawnsheridan]

Video in motion was working on G series up to 40 miles speed and i will be coding the SPEEDLOCK_SPEEDVALUE to nicht_aktiv to test for max speed soon.

Yes, I know.

40 mph don't count in my book. Its all or nothing.
.
And already tested a G12 ID5 NBT2 this morning, and no luck using SPEEDLOCK_SPEEDVALUE = nicht_aktiv.

 

[ed2111]

Thanks Shawn.
I had also tested the SPEEDLOCK_SPEEDVALUE and didn't get it to work.

Any good source for the E-SYS launcher PRO download? It's been a while since I obtained my software.

 

[shawnsheridan]

Thanks Shawn.
I had also tested the SPEEDLOCK_SPEEDVALUE and didn't get it to work.

Any good source for the E-SYS launcher PRO download? It's been a while since I obtained my software.

Just Email Developer TokenMaster at fxxtokenmaster@gmail.com.

 

[marcw]

Is it recommended to uninstall older versions of e-sys and install the newer version or can I install the newer right over top of the old installation? When installing the new version do I have to create a new token with a 48 hour waiting period? I had coded my car, but the dealer flashed the latest on it. Updated data files to 59.4 but my e-sys version is to old. Giving me some error when coding the car. Curious if I can install the latest e-sys on top of the older one.

Thanks.

 

[shawnsheridan]

Is it recommended to uninstall older versions of e-sys and install the newer version or can I install the newer right over top of the old installation? When installing the new version do I have to create a new token with a 48 hour waiting period? I had coded my car, but the dealer flashed the latest on it. Updated data files to 59.4 but my e-sys version is to old. Giving me some error when coding the car. Curious if I can install the latest e-sys on top of the older one.

Thanks.

Normally, you update only what needs updating, which in most cases is the psdzdata files only, and that is simply a matter of deleting existing psdzdata folder and replacing it with new one. But latest psdzdata version at some point will necessitate a newer version of E-Sys. At that point, you should uninstall old E-Sys and reinstall new one. This should have no impact on existing token-solution assuming you are using E-Sys Launcher. Lastly, update E-Sys launcher only as needed (bug fixes or feature additions). You can install it over existing version, and it should have no impact on existing token-solution.

 

[marcw]

Normally, you update only what needs updating, which in most cases is the psdzdata files only, and that is simply a matter of deleting existing psdzdata folder and replacing it with new one. But latest psdzdata version at some point will necessitate a newer version of E-Sys. At that point, you should uninstall old E-Sys and reinstall new one. This should have no impact on existing token-solution assuming you are using E-Sys Launcher. Lastly, update E-Sys launcher only as needed (bug fixes or feature additions). You can install it over existing version, and it should have no impact on existing token-solution.

Right. I updated the psdzdata file to latest and now I'm getting this error when coding: http://f15.bimmerpost.com/forums/showthread.php?t=1235033
Seems 58.x needs a newer version of e-sys than what I have installed. So I need to upgrade 3.26.1 to 3.27.1.

 

[shawnsheridan]

Right. I updated the psdzdata file to latest and now I'm getting this error when coding: http://f15.bimmerpost.com/forums/showthread.php?t=1235033
Seems 58.x needs a newer version of e-sys than what I have installed. So I need to upgrade 3.26.1 to 3.27.1.

Yes, that is correct. To use 59.4 PSdZData, you must update to E-Sys 3.27.1.

 

[KORAYK]

Yes, that is correct. To use 59.4 PSdZData, you must update to E-Sys 3.27.1.

hi Shawn I have smilar problem when I was trying to code clm_horn secure in fem body (for confirmation after lock)caffd cannot executable error after second attemp we couldnt connect car any more no zgw available error than I tried in different f30 there is no problem?like car banned us

we follow this codings first

1)we coded DVD in motion ok
2) we coded easy seat ok
3)try to find horn confirmation in fem body (f30) first everthing was ok we change one value as a active than didn t work roll back after second attemp give cafd cannot executable or something like that now we cant connect car because no zgw available error ,what should ***305; do?

 

[shawnsheridan]

hi Shawn I have smilar problem when I was trying to code clm_horn secure in fem body (for confirmation after lock)caffd cannot executable error after second attemp we couldnt connect car any more no zgw available error than I tried in different f30 there is no problem?like car banned us

we follow this codings first

1)we coded DVD in motion ok
2) we coded easy seat ok
3)try to find horn confirmation in fem body (f30) first everthing was ok we change one value as a active than didn t work roll back after second attemp give cafd cannot executable or something like that now we cant connect car because no zgw available error ,what should ***305; do?

Turn car off for 2 hours and then try and connect to it again.

 

[BMWS1KRR]

Thank you for all the help Shawn !

 

[jpimpao01]

Hi

after flash ZGW2 all ok and tried flash AAG give me error

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2017/01/08-17:09:45.766
[AAG - 71] - [Exception - AAG - 71] job failed with negative response error:
code: repeat job
description: Service RD returned a negative response with response code requestOutOfRange; ECU: AAG_71_ETHERNET
severity: ERROR

[AAG - 71] - [Exception - AAG - 71] job failed with negative response error:
code: repeat job
description: Service RD returned a negative response with response code requestOutOfRange; ECU: AAG_71_ETHERNET
severity: ERROR

[] - [Exception - AAG - 71] job failed with negative response error:
code: repeat job
description: Service RD returned a negative response with response code requestOutOfRange; ECU: AAG_71_ETHERNET
severity: ERROR

TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "2min 7s". [C206]

Any help, please...

 

[pweber84]

Guys,

I have 2011 535i F10 US and ZGW serach doesn't show up VIN number. I have no idea why, I have no firewalls active or anything. ENET cable is fine, tested on different BMW.
Can anyone tell me what is the other way to code CIC and KOMBI? Taking into consideration that ZGW search is blank and ESYS connection via VIN is grey can I somehow connect to HU_CIC and KOMBI directly? I know that CIC has IP which I can use, but is the same possibility to connect with KOMBI?

If yes then please tell me what is the IP of these two modules.

Thanks in advance.

 

[shawnsheridan]

Guys,

I have 2011 535i F10 US and ZGW serach doesn't show up VIN number. I have no idea why, I have no firewalls active or anything. ENET cable is fine, tested on different BMW.
Can anyone tell me what is the other way to code CIC and KOMBI? Taking into consideration that ZGW search is blank and ESYS connection via VIN is grey can I somehow connect to HU_CIC and KOMBI directly? I know that CIC has IP which I can use, but is the same possibility to connect with KOMBI?

If yes then please tell me what is the IP of these two modules.

Thanks in advance.

You cannot code Kombi direct by IP. You need to try another laptop. Some windows networking setups just flat out refuse to work.

 

[pweber84]

Thanks Shawn.

My problem is that I have this issue only with that one F10, ZGW is easily recognized with other Fxx cars.

I checked the errors via ICOM and ISTA-D and all is fine, however I have a problem to connect with E-SYS via ICOM 169.254.92.38:50160 - it gives me [G188] error (ICOM is reserved).
So the weird thing is that I can diagnose the car but can't connect with E-SYS to code. How it is even possible? It works in different way?

From the other side ENET doesn't recognize car at all (no IP) in ZGW search or E_SYS.

Any suggestions? Maybe I should disconnect battery for some time to see if this works?

Thanks.

 

[shawnsheridan]

Thanks Shawn.

My problem is that I have this issue only with that one F10, ZGW is easily recognized with other Fxx cars.

I checked the errors via ICOM and ISTA-D and all is fine, however I have a problem to connect with E-SYS via ICOM 169.254.92.38:50160 - it gives me [G188] error (ICOM is reserved).
So the weird thing is that I can diagnose the car but can't connect with E-SYS to code. How it is even possible? It works in different way?

From the other side ENET doesn't recognize car at all (no IP) in ZGW search or E_SYS.

Any suggestions? Maybe I should disconnect battery for some time to see if this works?

Thanks.

ENET should be getting IP Address. I have no idea what is up with this ZGW. Maybe it can be initialized with Tool32 ZGW.prg.