Well there is one good thing to come of this, you will wash the car yourself. Far more satisfying and much more rewarding.The back edge of the F30 hood is so close to the windshield that the wipers can only be lifted a couple inches. Lift further and the wiper arms will contact the back edge of the hood. Do it hard enough, and the paint will get chipped. There is a procedure in the manual to get the wipers to park in the upright position to clean or change the blades. Manual says to turn ignition off, then raise the wiper switch lever to the highest position for several seconds. I have tried this, and succeeded once in about ten tries. I am going to reread the manual, and try again. If I can't figure out how to do this consistently, I won't take the car to any car wash until CA or SA shows me how to do it. I can see the car wash dudes flipping the arms up like they normally do to wipe the bottom of the windshield, and then ooops, sorry. In the interim, I am hand washing the car at home.
I see there is another thread about this. Others have had the same problem making this work.
p.s. - We looked at several CPO E350s. Every one had paint chipped where wiper arms hit the back edge of the hood.