Bimmerfest BMW banner

1 - 12 of 12 Posts

·
Registered
Joined
·
550 Posts
Discussion Starter #1
i have asked this before, but didn't get many responses. i noticed that on F1 cars, it's either BBS or OZ.
 

·
King of Rear Clunks
Joined
·
12,903 Posts
I think you've answered your own question.
 

·
Registered
Joined
·
595 Posts
umm.....that's complicated, isn't it?

similar to asking: who makes the best golf clubs? since the pro's use FORGED titleist prototypes, does that mean i should buy DCI990s (cast)? or me (amateur) should be buying forged mizuno blades?

for wheels:

cast or forged?

track or street?

single piece or multipiece unit?

how much you gonna spend?

so many choices, it's complicated. track tires need to be light, but will crack/bend/shatter at the first sign of a boston pothole. street tires are looks first, performance second (right?). then, manufacturers make the same design in single piece and multipiece fabrications.

so, at the end of the day, what are you after?
 

·
KWiK
Joined
·
223 Posts
I think Fikse makes the best street wheel available.
 

·
Registered
Joined
·
550 Posts
Discussion Starter #5
blackdawg:

excellent points. never thought of it that way. here's my situation: looking toward next winter i need to buy snow tires. I could use the OEM wheels for my new snow tires because the summer tires are wearing out (probably one more season). if i do that then i would buy another set of wheels/tires for the summer. or i could just buy a set of dedicated wheels/snow tires come next winter.

so the new wheels i am looking for are for the street, and yes boston has bad potholes so i am looking for a strong wheel that can resist bending. cost is an issue too, but i am after quality and value more than the lowest price wheel.
 

·
King of Rear Clunks
Joined
·
12,903 Posts
I think there's something to be said for technology trickle-down, though. And the fact that a lot of 'premium brand' wheels are actually made by BBS and OZ.

But I did in fact forget Fikse and HRE. Thems are expensive, though, but they're modular so they're rebuildable, which can be cheaper in the long run if you plan on busting em up on a regular basis (about $300 to replace an outer rim vs about a grand for a new wheel, at least for HRE).
 

·
Registered
Joined
·
595 Posts
cost was an issue for me, too.

kaz is right about trickle down, for sure. the OZ wheels demonstrate this as they're very light.

BBS obviously has two lines: the appearance line and the hi-po line. the BBS RKs i bought for our 325xiT are probably poseur wheels, but they are light and my wife has always wanted those bloody BBS wheels. but BBS also has the new awesome LeMans wheels, the lightweight RC's. the RXs are damn heavy (snowflake wheels).

i bought some used Fikse's for my coupe from a ninja autoXer fella from atlanta. i guess he moved into some superninja lightweight MAG wheels which are so light and fragile they'd crack up on the street. kinesis maybe?

anyhow: i picked up the BBS wheels wickedly cheaply (in boston lingo) in the 16" size. i think they're still only cast, though, and not forged. or some hybrid.

details here:

http://artsci.wustl.edu/~atnguyen/wheels.html
 

·
Registered
Joined
·
1,790 Posts
Re: cost was an issue for me, too.

blackdawg said:

anyhow: i picked up the BBS wheels wickedly cheaply (in boston lingo) in the 16" size. i think they're still only cast, though, and not forged. or some hybrid.
You mean pissah cheap. Wicked is more of a Maine thing. ;)

The Rx's are heavy? Even the 2 piece? I thought these would be light.....:eek:
 

·
King of Rear Clunks
Joined
·
12,903 Posts
in_d_haus said:
I wish BBS would make the CH in a 17" myself.
Even the CH is a 18 would be great. I believe 17 and 18 exist; just not one that'll fit a BMW. Until I found these Alpinas (made by BBS), I was gonna get RCs. Couple friends of mine have em, and they're way strong and light. As for RCs, I still have a set of 17s off my old car (need to get rid of em) that are in fact really heavy. I had 3-piece RS (old-skool style) that were super light, and the RXs really slowed the car down.
 

·
Registered
Joined
·
3,077 Posts
Okay, lets solve this whole BBS weight arguement.

The fact is that ALL BBS wheels are quite light relative to almost any other company. Check out the numbers:

BBS CH Cast 18x8 24.0
BBS CH Cast 18x8.5 24.5
BBS CH Cast 19x8.5 26.0
BBS CH Cast 19x10 28.0
BBS LM Forged/Spun 17x9 21.4
BBS LM Forged/Spun 18x8 21.6
BBS LM Forged/Spun 18x8.5 22.4
BBS LM Forged/Spun 18x9.5 22.8
BBS LM Forged/Spun 18x10 22.8
BBS LM Forged/Spun 18x11 23.9
BBS LM Forged/Spun 19x8.5 23.0
BBS LM Forged/Spun 19x10 24.5
BBS RC Cast (soft) 16x7 15.0
BBS RC Cast (soft) 16x7.5 16.0
BBS RC Cast (soft) 17x7 16.0
BBS RC Cast (soft) 17x8 16.4
BBS RC Cast (soft) 17x9 18.4
BBS RC Cast (soft) 18x8 19.5
BBS RC Cast (soft) 18x8.5 18.7
BBS RC Cast (soft) 18x10 19.5
BBS RCJ Forged 18x8 17.9
BBS RCJ Forged 18x9 18.7
BBS RG Cast 15x6.5 13.2
BBS RG F1-Racing (Japan Only) Forged 15x6.5 9.9
BBS RG F1-Racing (Japan Only) Forged 15x7 10.2
BBS RG F1-Racing (Japan Only) Forged 16x7 12.6
BBS RG-R Forged 17x7.5 17.0
BBS RK Cast 15x7 14.2
BBS RK Cast 16x7 15.3
BBS RK Cast 16x8 15.9
BBS RK Cast 17x7 17.2
BBS RK Cast 17x8 18.0
BBS RK Cast 18x7.5 18.2
BBS RKII Cast 17x7.5 20.7
BBS RKII Cast 17x8 21.5
BBS RKII Cast 17x9 22.1
BBS RKII Cast 18x8.5 23.0
BBS RKII Cast 18x10 24.6
BBS RM 2-Piece (VW GTi) Cast (very soft) 15x6.5 15.0
BBS RMII Cast/Spun 17x8 24.0
BBS RSII Forged/Forged 17x8 23.0
BBS RSII Forged/Forged 18x8.5 24.0
BBS RSII Forged/Forged 18x10 25.4
BBS RSII Forged/Forged 20x9 27.4
BBS RSII Forged/Forged 20x10 28.3
BBS RTII Delta Cast/Spun 17x9.5 29.2
BBS RTII Delta Cast/Spun 18x10 33.4
BBS RV Cast 14x6 12.7
BBS RV Cast 15x7 15.5
BBS RV Cast 16x7 16.0
BBS RV Cast 16x8 18.2
BBS RV Cast 17x7.5 18.4
BBS RV Cast 17x8 21.1
BBS RWII Cast/Spun 17x7.5 22.6
BBS RWII Cast/Spun 17x8 23.9
BBS RWII Cast/Spun 18x8.5 25.3
BBS RWII Cast/Spun 18x10 26.3
BBS RX Cast 16x7 19.5
BBS RX Cast 16x8 22.0
BBS RX Cast 17x7.5 20.0
BBS RX Cast 17x8 22.7
BBS RX Cast 18x8 24.2
BBS RX Cast 18x8.5 26.1
BBS RXII Cast/Spun 17x7.5 21.2
BBS RXII Cast/Spun 17x8 23.6
BBS RXII Cast/Spun 18x8.5 26.3
BBS SX Cast 18x8 25.0
BBS VZ Cast 17x7.5 19.0

There. I feel better now. :D
 
1 - 12 of 12 Posts
Top