Hi All
I am trying to code my 2014 X6 E71 with NCS Expert the latest version with 5.0+ Daten file.
The issue is when i get to the Process ECU part and i dont get a list of modules to choose from.
Has anyone seen this before.
Here is what im doing
1. Load Profile fisterprofile
2. Press FI
3. Press F3
4. Select E70 from list then OK
5. Select CAS from list tthen OK
6. Press F6 for back
7. Press F4 to process ECU
This is where i expect to see a list of modules to choose from but i get nothing: cry:
Any help much appreciated
I am trying to code my 2014 X6 E71 with NCS Expert the latest version with 5.0+ Daten file.
The issue is when i get to the Process ECU part and i dont get a list of modules to choose from.
Has anyone seen this before.
Here is what im doing
1. Load Profile fisterprofile
2. Press FI
3. Press F3
4. Select E70 from list then OK
5. Select CAS from list tthen OK
6. Press F6 for back
7. Press F4 to process ECU
This is where i expect to see a list of modules to choose from but i get nothing: cry:
Any help much appreciated