BimmerFest BMW Forum banner

Z3 Alarm system

1232 Views 5 Replies 4 Participants Last post by  rawcoupe
I pulled my radio out but did not disconnect wires. Now, my remote key won"t work. Any ideas?

Had to pull stereo out to work on heater temperature control switch.
I forgot to say that my remote key was a dealer installed option when we purchased the car.
1 - 1 of 1 Posts
I've heard that when reinstalling the the radio, you must ensure the gray antena looking thing that sticks out of the back of the stereo, ends up back into the hole in a bracket towards the firewall. It is possible to reinstall the stereo misaligned. Use a flashlight to see the hole and make sure you install the stereo aiming for that hole. Let me know if that works.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.