Hello, I have a problem with
BMW M4 navigation NBT EVO, after encoding EsysPlus, the screen shows the message "no signal", the unit no longer CAFD position. I tried to "detect CAFD SWE" detects correct but ends with an error:
Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet
TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2016/12/09-16:25:19.158
[] prepareTALExecution started
[] prepareTALExecution finished
[] prepareVehicleForCoding started
[] prepareVehicleForCoding finished
[HU_NBT2 - 63] prepareECUforCoding started
[HU_NBT2 - 63] prepareECUforCoding finished
[HU_NBT2 - 63] authenticateECUforCoding started
[HU_NBT2 - 63] authenticateECUforCoding finished
[HU_NBT2 - 63 - cafd_00001ef6-006_018_016] Transaction type: cdDeploy; Message: TA started
MCDDiagService<id=62649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUCoding, service=WDBI_PLAIN - WriteDataByIdentifier with unlimited Data-ID (plain hex value), description=error: negative response : requestOutOfRange, link=HU_NBT2_63_ETHERNET>
[HU_NBT2 - 63 - cafd_00001ef6-006_018_016] Transaction type: cdDeploy; Message: TA finished
[HU_NBT2 - 63] There was an error during TAL execution, please check the log files.
[HU_NBT2 - 63] - [Exception - HU_NBT2 - 63] job failed with negative response error:
code: service returned global negative response
description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; ECU: HU_NBT2_63_ETHERNET
severity: ERROR
[HU_NBT2 - 63] finalizeECUCoding started
[HU_NBT2 - 63] finalizeECUCoding finished
[] There was an error, please check the log files.
[] - [Exception - HU_NBT2 - 63] job failed with negative response error:
code: service returned global negative response
description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; ECU: HU_NBT2_63_ETHERNET
severity: ERROR
[] finalizeVehicleCoding started
[] finalizeVehicleCoding finished
[] finalizeTALExecution started
[] finalizeTALExecution finished
TAL execution finished
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "24s". [C206]
Abarbeitung beendet
I tried later NBT coding by ISTAP but "FinishedWithError" Rheingold shows errors:
026308 - HU-H No current coding data stored
02630A - HU-H Coding data not enabled
B7F87F - HU-H encoding fault
B7F880 - HU-H encoding fault
B7F8C3 - Conection, headunit to CID
E14600 - TCB: Ethernet: Unexpected communication termination.
Please help, thanks
