[Yeaham]

Sorry but i'm confused by that question.

I can "Edit" the FDL under that CAFD (11AB) and open to see the Funktionen listing (ZUENDKRIEIS_XX, and a few other settings), just cant find the ones I'm looking for (search finds no existence of them). Do I need the untrimmed CAFD? Before the ECU update at the dealer I used Esys Launcher 2.4.3 with an earlier psdzdata that was supporting my I-Step then and I found those parameters in those areas with no problem. Does the new version of launcher trim it differently than last time?

Thanks

 

[shawnsheridan]

Sorry but i'm confused by that question.

I can "Edit" the FDL under that CAFD (11AB) and open to see the Funktionen listing (ZUENDKRIEIS_XX, and a few other settings), just cant find the ones I'm looking for (search finds no existence of them). Do I need the untrimmed CAFD? Before the ECU update at the dealer I used Esys Launcher 2.4.3 with an earlier psdzdata that was supporting my I-Step then and I found those parameters in those areas with no problem. Does the new version of launcher trim it differently than last time?

Thanks

Disregard Trimmed part. I had to change Launcher PREMIUM Car Series to F056 to get invoke the Mapping; however, in looking at it, it appears this CAFD is not being mapped correctly.

 

[Yeaham]

Oh interesting, been a year since I've used the tools, but thought it was much easier to find the parameters I was looking for.

So is this mis-mapping a function of the E-sys tool itself?

 

[shawnsheridan]

...So is this mis-mapping a function of the E-sys tool itself?

Yes.

 

[Yeaham]

Will a newer version of E-sys help? Though I guess its a matter of what the latest E-sys launcher supports as well since I cant make any changes unless it does.

Thanks,

 

[shawnsheridan]

Will a newer version of E-sys help? Though I guess its a matter of what the latest E-sys launcher supports as well since I cant make any changes unless it does.

Thanks,

No. It has nothing to do with E-Sys. The CAFD Mapping Database is builtin E-Sys Launcher.

 

[Yeaham]

Ah, ok. So I'm assuming I'm dead in the water then, or at least until an updated E-Sys Launcher addresses it.

Thanks for explaining and looking into it.

 

[shawnsheridan]

Ah, ok. So I'm assuming I'm dead in the water then, or at least until an updated E-Sys Launcher addresses it.

Thanks for explaining and looking into it.

Yes.

 

[Yeaham]

Well that's unfortunate. Would the older version of E-Sys (3.24) and E-Sys launcher (2.4.3) work the latest psdzdata? Ie: could those solve the mapping issue?

Thanks

 

[shawnsheridan]

Well that's unfortunate. Would the older version of E-Sys (3.24) and E-Sys launcher (2.4.3) work the latest psdzdata? Ie: could those solve the mapping issue?

Thanks

No. I already confirmed you are "dead in the water", until new version of Launcher PREMIUM is released that has an updated CAFD Mapping Database. Why you are asking now about older E-Sys and older E-Sys Launcher escapes me. :dunno:

 

[Yeaham]

Desperation

Question is because it seemed to map those parameters before in the previous version as I was able to find and change those settings. Wasnt sure it was a function of the just the updated launcher or all of the above (new ISTA-P with I-Level, new E-sys, new E-sys launcher). That's all.

 

[shawnsheridan]

Desperation

Question is because it seemed to map those parameters before in the previous version as I was able to find and change those settings. Wasnt sure it was a function of the just the updated launcher or all of the above (new ISTA-P with I-Level, new E-sys, new E-sys launcher). That's all.

ECU has new CAFD, and it must be added to CAFD Mapping Database. Mapping of old CAFD is irrelevant.

 

[Almaretto]

Ah, ok. So I'm assuming I'm dead in the water then, or at least until an updated E-Sys Launcher addresses it.

Thanks for explaining and looking into it.

No. You can accomplish the same with VO coding.

 

[Yeaham]

I'll have to look out how to accomplish it that way then....

Thanks for all the responses...

 

[997usa]

hi guys, i came from an F10 M5 and an F83 M4; Now a G12 B7 which has a COMPLETELY different CAFD naming convention... Any good G11/G12 cheat sheets out here?

 

[Almaretto]

hi guys, i came from an F10 M5 and an F83 M4; Now a G12 B7 which has a COMPLETELY different CAFD naming convention... Any good G11/G12 cheat sheets out here?

No. Cheat Sheets are no longer made. Instead, most write Launcher Codes.

 

[kopernik]

Very please for the latest psdzdata files for e-sys!
Thanks in advance!

 

[shawnsheridan]

Very please for the latest psdzdata files for e-sys!
Thanks in advance!

What is wrong with links in Post # 1?

 

[Mullins]

Howdy, I had my cluster replaced in my F22 and lost all my coding data. I'm trying to get back into reset all my settings but my FXX token i bought several years ago is expired (no surprise). It looks like this launcher premium tool replaces a need to buy another token, but it's asking for an activation code. I did shoot the code off to Token to see if he can generate one. Is that the right way to go about this? Wasn't sure if there was something I missed when trying to generate a new EST file. Any help would be awesome!

 

[Almaretto]

Howdy, I had my cluster replaced in my F22 and lost all my coding data. I'm trying to get back into reset all my settings but my FXX token i bought several years ago is expired (no surprise). It looks like this launcher premium tool replaces a need to buy another token, but it's asking for an activation code. I did shoot the code off to Token to see if he can generate one. Is that the right way to go about this? Wasn't sure if there was something I missed when trying to generate a new EST file. Any help would be awesome!

You should not need Activation code in Fremont unless you are using VM or have non English computer settings. Yes, email is the way to go, but new codes are on temporary hold until new Launcher release.