E65 DDE506 ZB No. 7810915

 

Cas3



Hello,

What should i use. My ZB number 9237047 but i cant find it in the list.
SP-DATEN 62.1

 

Thanks,
How did you find it?
My car is 730d E65.
Now what will be the best option,to program it with this code or to just select Update Zusb and select ECU family Dde 506 and let him do his job???
The problem is that for most of my modules WINKFP doesn't find the ZB no.

 

Rename DATA folder to DATA X in NFS. Create new DATA folder and copy DDE506,gdaten,konv.tmp from SP-daten/E65/data to NFS/DATA.
Run Winkfp=>comfort mode=>update=>choose ZB(7810915)=>Enter VIN=>Done=>Program

 

I don't have such file in G daten.

 

Maybe my Winkfp has problems.
In winkfp I see ZB numbers that in the Data folder at Dde 506 don't exist. Is this Right?

A pic with my UIF too. Only to 4 Ecu's Winkfp recognize the ZB.

I updated before with Bmw coding tool.
Should I update now manually like you said?

If I choose Comfort then Update Zusb is no option to select ZB no.

 

Just copy DDE506,gdaten,konv.tmp from SP-daten V60 E65/data to NFS DATA folder.

After click update ZUSB you will find DDE506 in winkfp click ok. Now you can choose correct ZB No. to proceed programming

 

Ok. So I have this folders there.

 

What is the difference between update Zusb or choose the ZB no??
Can you full flash or just update the module??

So my m57tud30 engine is DDE506 in Winkfp. Found it on a Russian site.

What is the problem with this module in my UIF file???

 

I found a way to find my ZB from UIF in the file 'DDE506.HIS'. This file contains all the ZB number from this Ecu family.

The DDE506.dat contains the new/recent ZB numbers.

The DDE506.HWH contains the history compatible hardware numbers for an Ecu family.

Now the thing is if i really want to see my old ZB number in Winkfp,can i just add it to the .DAT file and then Winkfp is able to see it???

 

Its because you havent loaded your data. The ECU you are looking at is CAS3. Press import on the top bar, choose import assembly line data. choose your data folder from your sp daten folder.

 

I have all the software I believe up to date. I tried 2 to 1 transmission yesterday and assembly number I put in zusb said error. Today found this post. How do i figure it out. Obviously I need to know why family for all updating. Please help if anyone is around still. 08 e66

 

What ZB number are you looking for? and why do you want to update EGS?

 

Hard shift from 2nd gear to 1st when stopping. I went thru the steps to update in inpa and I keep getting error when putting in my as
sembly # into zb. I read if you know cry family I can go around the zb #. In new to this so I'm kinda confused.

 

Ecu family. Not cry lol

 

share your the ZB that is on the EGS now, will take a look

 

08 e66 says 7587120 i was trying the 2 to 1 transmission update/fix. I also saw that I would need ecu family for other updates and coding. Thank you

 

ECU family is EK9287

7587120,0000000,7586909,A,7587119DA,0FFFFFFFFFD,000,1 0
But as far as I could see there is no never soft for this ECU, checked with 60.1 daten files but didn't have much time to see, maybe part number changes....

 

7589405 assembly #. Still getting error though.

 

7589405 ECU family is GKE191, its note the same you posted before....?!

 

sorry phone was being crazy!! thank you

 

What with winkfp? After you install it do you have to import files to it to make it work??

Sent from my LG-LS777 using Bimmerfest mobile app

 

yes you have to load the daten files on the chassis you are working on. I use the BMW "coding tool" for this task as it is very simple and straight forward

 

Hi,
This is my first post. I managed to update some ECU on my 2008 520D E60 using winkfp. However, I am unable to find DME ZUSB 781253. As per INPA the SGBD is D71N47A0. Not sure if should I update from DDE71 family by selecting Update. I am bit scared of breaking the ECU as winkfp does not find my DME ZUSB 781253 and not sure if the new ZUSB 8506837 is the right one.

Does anyone have an idea how to find the ZUSB or update my DME?