Hello Shawn,
can you please send me a link to the latest Psdzdata Full?

 

Hey Shawn,

me too please Thx !

 

Hi Guys. Does this mean the I level in my car too new. Dealer updated my car recently with latest firmware. Do I need newer PSDZ files. The SDP folder is labeled 4.28.41. I want to use ista for retrofit.
Ive been doing a bit of research about ACC Stop&Go SA 5DF. My car has a front radar (non long range). I can see from the PDF attached that in theory, I should be able to get basic ACC enabled. I know I need to change buttons on steering wheel. There are 3 different types of cruise control buttons. Non adaptive, basic adaptive and the ones you get with Driving Assistant plus. In some Euro countries, you can buy ACC from connected drive store for about 800 euros.
Active Driving Assistant Professional (SA 5AU) will require KAFAS High, Radar long range and some extra rear radar sensors. I dont want to do that. ACC Stop&Go SA 5DF is a basic version which my car already has the hardware for. Some guys in Indonesia sell a kit which includes front radar (non long range) and they show it working.
Latest firmware has M Lap timer but it only works with iPhone so no good to me.
My car is a 2019 320d M Sport with Sports plus Xdrive (UK Spec)

 

Hello, please pm the link for the full PSdZData
thank you much

 

@shawnsheridan could you please share the latest with me also? Cheers mate.

 

Hello can i get link to latest psdzdata if possible


Sent from my iPhone using Tapatalk

 

Hi, can anyone pls share the latest PSdZData? F33 and F48 here... Many thanks in advance.

 

Hi, could anyone please PM me a link to the latest PsdZData? Many Thanks

 

Hello,

could i get the link?

THX to all members for supporting . Great Support and Members

 

Hello, Shawn!
Could you please assist with latest availavle working version of PsdZData.
Thank you in advance

 

Hello Shawn,
can You please send me a link to the latest Psdzdata Lite?
Thanks

 

Hello Shawn,
can You please send me a link to the PSdZData_Full ?
Thanks

 

Hello all -

I'm hoping someone can help as I've spent an extraordinary amount of time and waste of money on download links. I have an early 2013 F10 535i and have installed MHD ECU flash software to load JB4 Back End Flashes. When I installed the MHD software I ended up with Chassis Stabilization alarm and driving modes no longer work. The DSC module is the primary culprit. MHD told me this happened because I have really old firmware and I just need to update my modules firmware to resolve the issue.

I have a working install of ISTA+ v4.27, ISTA-P and the regular Bimmer tools packages. I have somewhat current Datens also. The problem I'm having is in ISTA+ the "Update Software" tab is greyed-out. For the life of me, I can't figure out what to do. I found an article that says I need an ISTA+ install with SDP 'Service Data Package'. I'm not sure what this is or if the files can be added separately, where they would go, or how they are integrated. One last detail is my laptop doesn't meet the hardware requirement - I have an i5 1700Mhz and requirement is 1750Mhz - not sure if this is possibly causing a lockout from Software Updating.

I'm hoping someone can point in me in the right direction. I'm open to paying for help or more software, if that's what I need to do. My apologies if I'm posting in the wrong place.

Thanks!

 

Sorry, additionally to my mesage above link for FULL version required

 

Hello @shawnsheridan
Can you please send me a link to the PSdZData_Full ? I accidentally coded my entire car and the lite version wont detect the caf for swe. I assume its because im using the lite files
Thanks

 

Hello Shawn,

Can you please send me a link to the PSdZData_Full ?

Thanks in advance!

 

Looking for software downloads/links to code a 2019 440i xdrive.

Hi everyone,

Could I get the PSDZData Full? Need it for my F30.

Thank you.

PM's sent.

 

Looking for software downloads/links to code a 2019 440i xdrive.

 

This might be useful : Fxx-/Ixx-/Gxx-series - Coding: (No Request) Latest Software Links | BimmerFest BMW Forum

 

Hi everyone,

Could I get the PSDZData Full? Need it for my F30.

Thank you.

 

Hello Shawn,
can You please send me a link to the latest FULL Psdzdata?
Thanks

 

PM sent.

 

Hi Shawn.

Please could I have the link to Psdzdata lite?

Thanks.

Steve.

 

PM sent.

 

Hello Shawn,
can You please send me a link to the latest FULL Psdzdata?
Thanks

 

PM sent.

 

Hi Shawn,
Could you please send me a link to the latest FULL Psdzdata?
Thanks much!

 

PM sent.

 

Hi Shawn, Can you please send me a link to the PSdZData_Full . TIA.

 

Asked and answered:

Coding: (No Request) Latest Software Links

What is Included: Software Overview and Requirements Latest Software Links & Installation Instructions NOTE1: URL Links are in BLUE and pictures are links to larger images. NOTE2: Click here for Getting Started Guides, Tips, & Cheat Sheets 1. Software Overview and Requirements: This...

www.bimmerfest.com

 

Hello Shawn,
can You please send me a link to the latest FULL Psdzdata?
Thanks

 

PM sent.

 

Hey Shawn, could you send me link to the latest Psdzdata, I don't need flashing (but downloading full set is also fine) just coding after dealer updated my G31 to S15A-21-3-520.

Thanks!

 

PM sent.