I don't think so, sorry.

 

What about this?

 

Can't go wrong with PEAKE!

Manufactured specifically for BMWs, Peake scan/reset tools make servicing your BMW cheaper and easier than ever.

The tool easily connects to your diagnostic port in the engine bay and allows you to read any codes for a check engine light as well reset your oil service and inspection light with the push of a button.

This tool is a must for the first time do-it-yourself mechanic and to complete any tool box.

Click HERE to order or for more information.


Please let us know if you have any questions! Feel free to shoot me a PM or email.

Best,
Joe

 

I have the same issue on my 2000 328. The stupid airbag light keeps illuminating on my instrument cluster. I took it to my shop that has a BMW dis tester and fault code reader. They reset it, but it just came back on a couple of days later.

 

Check your battery connections. There is a pigtail wire that if loose will trigger an airbag light.

 

Do you know that you don't actually HAVE an airbag problem?
- What can cause an airbag light (1) (2) (3) (4) (5) (6)

- SEAT CABLES BREAK: seat cables that fall out causing seat twist (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) & accidental airbag light fix (1) (2)

 

Hi. An easy way to get rid of 'Airbag' light- http://shop.ebay.com/?_from=R40&_tr...m=R40&_trksid=p5197.m570.l1313&_nkw=bmw+airbag+bypass&_sacat=See-All-Categories
Simple to fit . Jim

 

no idea why i haven't heard of "Passenger Seat Occupancy Mat Bypass" way to fix the airbag light issue.
all i remember was that it requires a scan/reset tool that is capable of resetting the airbag light for BMWs

to save even more money than buying a sensor bypass unit, like jcjdavis1 mentioned above, i am following what these two guys do:

and
http://www.bmwfanatics.co.za/showthread.php?tid=10737

just bought some 100 ohm resistors and 1N4001 diodes from radio shack today and will build the unit and insert it to the circuit under the passenger seat tomorrow

100 ohm resistors: 5x for $0.99 (only two are needed)
diodes: 2x for $0.99 (only one is needed)

this simple sensor-bypassing mod basically tells the ECU that there's ALWAYS a passenger on the front passenger seat...
so that in case it determines to deploy the airbags, it will deploy the front passenger airbag, which means, having this mod done, you should never have an underage kid at the front passenger seat.

hopefully, the light will be off when i finish this mod/fix... some claimed that it still requires a reset tool to turn the light off even with this sensor-bypass fix done.

 

since the $2 DIY fix was completed a few days ago, i've driven over 400 miles with and without passengers.
and the problem is gone! :thumbup:

i didn't need a scan/reset tool to reset it, maybe because the airbag light wasn't always on before the fix.